Jump to content
SAU Community

Recommended Posts

Don't agree with this statement. All the stuff I've seen from China has been lower quality than the Japanese made stuff. 1/2 the price for sure. And China may make thousands of motorbikes but not that many make it into Australia.

Aftermarket gear they close the gap somewhat, but I won't in general buy china made electronics or important components.

do you know your ipod is made in china. is your ipod low quality? mine is not

for the coils, if splitfire are just $100 more i really wouldnt bother thinking.

Edited by Eliack
  • 4 months later...

i thought id add my 2c - i used to run the stock coils cos of a bit of misfire. so i changed it to splitfires.. it worked ok for a while....

one day i had a BAAAD misfire on cold starts in the morning. i got IGN error code when running a diag. i put my stock coils back on.. and walla!!!!!

i emailed NENGUN for a refund/replacement.. they said it was outside the 1 year warrany(they are telling fibs). in the end i wrote them a REALLY abusive email and i am ready to throw my splits in the bin!

Iv learnt the HARD way.. theres no replacement for the stock coils. they are just plain awesome! if you having issues, an ignition amplifier does wonders!!

BTW - I have seen alot of 1000+hp GTR's running stock coils with ignition amplifiers.

Seriously, splitfires etc are crap(no offence). I have heard from the big boys here in nz that the stockers are best. Now i know for a fact.

MUCH respect to OEM!!!

they are just plain awesome! if you having issues, an [ignition amplifier does wonders!!

BTW - I have seen alot of 1000+hp GTR's running stock coils with ignition amplifiers.

:blink:

details?

Edited by Tomek
  • 1 month later...

super spark misfire - recently shown in a column in either hpi/hot 4s cant remember which one. Go splitfires (which i think it was donnons column) which is the closest thing to stock coils anyone will get :) or even the jjr ones for warranty

Edited by DaGr81
Would you mind finding out the magazine and issue in which you read that?

My bad they didn't say which brand but they are red coils (anyhow the whole article is in hot 4s issue 171)

Have fun it's a great read

3 that i know of.. jjr. superspark. fet. plus i have heard of different brands as well other than oem or splitfire so there is a wide selection to choose from, could be any if they haven't stated.

Edited by heller44

I don't see the point of this discussion....I'm willing to bet these all get made in the same factory in china. Sure maybe 1 in 100 have a problem but if you buy it from a store you can always get it replaced.

  • 1 month later...

So now with the price difference of $250 between JJR and Splitfire (thanks to the worthless AUD) which would you choose for a daily? Planning to keep the car for another 2-3 years. Has anyone had any bad experiences with the JJR since the last update on the thread and if so how has the 12 month warranty held up with the seller?

Cheers

well there may be a price difference now but I guess once Just Jap are out of current stock they will have to up prices too. Splitfire in yen vs JJR coils in USD probably they have both increased by about 40%.

Buy now before the local stock runs out.....I don't think AUD will be rising again for a wwhile

  • 4 weeks later...

i just bought a set of JJR coils and ran them down to the tuner as my car was missfiringall over the shot... as i gave them to him and told him it was JJR his head just hit the box... im hoping for about 240rwkw and he told me a bloke running the same power blew 3 sets of JJR on the dyno.... splitfire is much much better i think after that...but will see how my car goes when its done...

btw this was rank rotary and sabbiden automotive that said this .. any comments on this????

i bought a set of JJRs two weeks ago from justjap as the Splitfires were no longer an option for me. car was missing pretty badly at the top. had them installed. went and got a Toshi remap the next week. zero misses, awesome spark no problems to date. will keep you informed if anything does come up though

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...