Jump to content
SAU Community

Recommended Posts

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

D2 rear brakes arrived today, was originally going the G4s but Darron at just jap

suggested that the D2 were a little bit easier on the eye, otherwise the same, also had these in stock.

accidently sent me the rears instead of the fronts, but i reckon he was just ensuring i would buy both sets lol.

darron was excellent, cant fault just jap service.

weights of engine & transmissions have been talked about alot in this thread, but today i weighed a few components thanks too 'Victory' bringing a set of scales in.

we worked out a few weeks ago that a stock standard LS2 weighs 90kg. That was with standard cast iron exhaust manifolds.

The tremec 6 speed complete with shifter, slave cylinder & release bearing weighed 62kg.

unfortunately i didnt weigh the old clutch & flywheel assy, but should have saved a couple of kilos there as the old 12" clutch was massive with the cast flywheel. Know running the steel flywheel with 10.5" clutch.

For a comparison we weighed a RB20 5 speed. It weighed 39kg minus shifter. Ill weigh the clutch and flywheel assy tomorro. So i reckon a rb25 turbo box would weigh around the 50-55kg mark. so i think i may be giving 10-15kg away in transmission weight but be ahead 50-60 in the engine department. i have a rb25de in the shop to weigh once we figure out how to do it without breaking the scales. might have to use some scales from the butcher or fruit shop lol.

Gary from superior suspension also weighed the stock springs which came up around 6kg each. the new coilover springs weigh 900grams. thats 20kg. but the new disks are heavy so i will be giving some weight back. ill weigh the old & new rotors 2morro.

its a bit of a juggling act but hopefully it has lost and gained weight in the right places.

3D Sports Sedans have a minimum weight of 1125kg, but there is no minimum weight for super sprints so hopefully im under and can add and remove weight when necessary.

weighed rear gtst against gtr alloy stub axles today and there was 3kg difference each side. but probably give that back in drive shaft weight.

also 12kg difference in gtr to gtst bonnets. i thought that was huge.

didnt get a chance to weigh other stuff but will post when i do.

boot mate....wieght those up it will make your eyes water.

I thought exactly the same thing about the new brakes and suspension gear....it is heavier :) but should be worth the trade off.

and yes purple is easier on the eyes....thats why I stole the new d2 calipers and replaced the g4s on the stagea...then put the g4s on the race car rofl. they all bolt on the same adapters and are interchangeable.

what are you doing with the handbrake? looks like the d2 rears don't have the handbrake. are you going to tap in a hydraulic one or just not bother.

handbrake doesn't really matter on an n/a race car (you can turn it off and leave it in gear) but in a turbo car you need a handbrake to hold it if you want to leave it running to cool the turbs down.

yeh rotors are definately heavier, 8.6kg each. rears incorporate handbrake drum into the hat so no probs there.

Callipers wouldnt be much different. also save 5kg a corner with the coilovers, so most of should even out.

cant wair to weigh the whole thing finished so i actually know where i stand with it.

boot mate....wieght those up it will make your eyes water.

I thought exactly the same thing about the new brakes and suspension gear....it is heavier :P but should be worth the trade off.

and yes purple is easier on the eyes....thats why I stole the new d2 calipers and replaced the g4s on the stagea...then put the g4s on the race car rofl. they all bolt on the same adapters and are interchangeable.

what are you doing with the handbrake? looks like the d2 rears don't have the handbrake. are you going to tap in a hydraulic one or just not bother.

handbrake doesn't really matter on an n/a race car (you can turn it off and leave it in gear) but in a turbo car you need a handbrake to hold it if you want to leave it running to cool the turbs down.

post-20078-1222900450_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...