Jump to content
SAU Community

Recommended Posts

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

there are also startermotor relocation kits available now which puts the starter on the other side which would solve all the issues. if your 32 goes 1350kg, you will be 450kg lighter than a VE, trust me, you dont need to turbo it. the car turns 3rd gear for fun. the torque is massive.

found a thread on sump extensions and baffeling, going to do this before next track day.

http://www.performanceforums.com/forums/sh....php?t=67247482

That sump looks the money, bolt it up and get to wakie hehe

COOL! Thanks for posting. Its got some toe out of turn 1 when you stretched its legs. Sounds so sweet, makes more usable power then any turbo 6 would make. So in the world of crazy conversions i am torn between Chev or 20B :P (not that i will be doing either...but fun to dream)

brakes are great, they were recommended by Duncan who is a good source of info and advice for most things bar pushrod v8s lol. They easily outbtake the mechanical grip of the tyre if you jump on them. i realed off 6 laps straight, 3 of which were in the 1.08sand the rest 1.09s and they were great. its the first time ive had the confidence to climb on them hard as the car setup is improving all the time. i could cover the brake in turn 1 at 240kph without unsettling the car and easily make the turn in to turn 2, very happy. but my car is light so doesnt work them as hard.

Sounds plenty strong stu :P

How are you finding the brakes?

haha get stuffed both of you :P

good to see the times tumbling Stu....I'm sure it has a couple more seconds over the next 12 months with more development which makes this about the quickest GTST going around

ok Roy, its only a warm up lap while tuning but its ok.

Oh yeah bring on the SAUNSW day!!!

Im not kidding, so many people say it sounds like a v8supercab, and you know what? Get someone to drive it and close your eyes. You'll agree!

I finally worked out where you got the inspiration from for the colour scheme for your car - you copied one of my toys! :devil:

I built this baby from a wreck 25 years ago and have spent the last month bringing it back to life after having it in storage for 22 years. She also runs a side pipe with a very open exhaust - she makes some noise (stirs up the neighbours to no end) but it is not in the same league as your car.

In addition, Daniel's car now has a complete new front end (suspension, steering and brakes) in it and it is at the panel shop for some structual repairs. I am also in the process of picking up a full set of R33 GTR front panels (guards, bonnet and front bar) so the big question is do I make it into a Series II or a GTR. Decisions, decisions but to save 20 kg and be able to run 9's all round is very tempting........

post-24210-1274269204_thumb.jpg

post-24210-1274269232_thumb.jpg

post-24210-1274269252_thumb.jpg

post-24210-1274269429_thumb.jpg

ahh, good charles, good too see the projects are coming along. the little jeep looks great. sooner its done you can turn your attention to the track cars.

I started the oil pan/sump modifications on saturday. actually almost finished it with only some internal gates left to do and put a relief in the front fot the sway bar.

hope to have it finished this week.......then just have to swap it with the one in the car and re-plumb the cooler and external oil filter. Pretty happy so far as it only took about 4 hours.

I finally worked out where you got the inspiration from for the colour scheme for your car - you copied one of my toys! :(

I built this baby from a wreck 25 years ago and have spent the last month bringing it back to life after having it in storage for 22 years. She also runs a side pipe with a very open exhaust - she makes some noise (stirs up the neighbours to no end) but it is not in the same league as your car.

In addition, Daniel's car now has a complete new front end (suspension, steering and brakes) in it and it is at the panel shop for some structual repairs. I am also in the process of picking up a full set of R33 GTR front panels (guards, bonnet and front bar) so the big question is do I make it into a Series II or a GTR. Decisions, decisions but to save 20 kg and be able to run 9's all round is very tempting........

post-20078-1274581928_thumb.jpg

post-20078-1274581944_thumb.jpg

post-20078-1274581959_thumb.jpg

post-20078-1274581971_thumb.jpg

post-20078-1274581986_thumb.jpg

ended up finding that it was rocker ratio that was the issue, not the brand so replaced the 1.8s with 1.7s.

we tried to run a group buy on custom oil pans, but had no interest. if you want one done PM me. there are pics of the rb sumps i have done on here, but like i said people were to tight to spend $550. rather rebuild engines lol.

Looking nice stu :P

Do you wanna do my 30 sump lol?

And what rockers did you replace the Yella Terra's with, I think you said Harland Sharp was a possibility

hahha, you know, they look like a horse.....

got the sump finished this arvo and back in the car tonight. re-plumbed the remote filter, cooler and oil pressure switches.

everything is sweet, fits neatly with no clearance issues. Engine now holds around 8.5 litres on a dry fill which is a great improvement over the 6 litre capacity from factory.

unfortunately on start up we found a pin hole on one of the welds around the high pressure outlet so the pan needs to come off again. I wont be doing it in the car again so going to pull the engine and put a bearing set through it while im at it.

happy that it all fits and everything is plumbed, but also dissapointed with the leak.

probably puts me out for sau track day. ;)

charles....definately gtr front....more rubber is always handy up front and it gives you the option of running same size tyres all round.

stu...what is a "rocker"??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...