Jump to content
SAU Community

Recommended Posts

hi, i'm new to this forum.

recently i replaced the blown engine out of my r33 gtst skyline with another one that i bought off ebay. everything went in and it starts and everything. however, there it has a few problems.

1) the revs fluctuate betweeekn 500 and 1300 rpm.

2) when driving and coming to a complete stop when you have the clutch in it just wants to stall out.

3)there is this fkn loud tapping sound comming from the bottom of the inlet side of the head. ( a few people have told me that it could be the lifters) personally i think the person who put the timing belt on originally it could be a tooth out but would it cause this problem? and the car goes really shit not smooth at all!!!!!!!

4) when coming on boost, the car just backs off by itself liek it sputters and missfires.

ive nearly had enuf of this car lol.. plz help. Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/190213-tapping-sound-coming-from-engine/
Share on other sites

1. Check AAC Value - also related to #2

2. I reckon you have a vac leak in a hose somewhere. Go over them all and find it

3. Could be anything fron noisy injectors, to lifters. Get a mech to check if unsure

4. AFM or, again the vac leak causing issues, spark plugs possibly, coils... could be many things

Basically you have common problems that are all trial and error mate.

Just keep checking parts, and have a read of various 'misfire' threads in this section that go over various problems.

AFM for the idle problem, stalling might be caused by a incorrectly place hose or not sealed like a atmo blow off valve. Also sure its not doing R and R rich and retard. The ticking most likely bad seated exhaust manifold, Check intercooler pipes and what not.

i mean liek a really loud tapping sound at idle.. and this gets louder the more u rev... it sounds like the cam is hitting the lifters

Sounds like big end bearings to me ..... Is it louder when the engine is hot ???

Im pretty sure that if it was a spun bearing the engine would be dead by now as once they go, they don't last much longer so i don't think its that.

If it gets louder with revs its obviously something that rotates and increases in speed so check your timing belt, tensioner, cam gears etc. If not then yeah it could have something to do with your cams/lifters.

Hi,

I've got the same problem with loud tapping sound on my R34 GTT except that it isn't always there, it's intermittent. I suspect VVT as it's comming from around the same area where VVT is situated on the intake cam. I know that SR20 from S14 and S15 are notorious for noisy VVT so I suspect that RB might have the same problem.

It'd be interesting to know what your mech's verdict would be.

i had that for a day or 2, turned out to be my radiator fan hitting the intercooler piping :P

Haha, I had the same problem. I removed the insulation from under the bonnet and problem solved. Seems the bonnet+insulation was pushing down on the i/cooler piping and as a result the fan was hitting it. :P

  • 1 month later...
This may be a few things.. but i think its the oil not getting up the top of engine quick enough? What viscosity oil are you using?

not sure wat oil, i put synthetic oil that was recommended from autobarn

they looked up my car in a book?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
    • FYP. Sadly. Even bolt cutters wouldn't take 2 sec. But in the days of 18v angle grinders, nothing is safe.
    • One piece driveshaft I would recommend a dual CV setup otherwise stick to OEM. I have heard most one piece driveshafts cause excess vibration otherwise. The transmission grind I'm quite familiar with. You can try shockproof gear oil, otherwise you need a new transmission. The shifter is extremely simple on these cars. If you want pull apart the assembly and replace the plastic bushing but I doubt that fixes anything. The tail light issue is very common, unfortunately new tail lights are long discontinued. The trunk antenna going up always is because your radio doesn't have a true power antenna control, just remote amp power signal. There is a blank switch plate that you can pop out and install a switch for this or alternatively source a head unit that has proper antenna control. Throttle body sticking you have to disambiguate by disconnecting the cable and seeing if the linkages are the problem or something else. There is a procedure to adjust them, refreshing them is also somewhat involved if that's the issue. I have dealt with many of these issues. Old cars really are fractals of problems. The more you fix the more you discover there is to fix.
    • Welp, you've got a long list of experiences right there. I'd say you're on the right path.
    • That's correct, suits my requirements a bit better. Sure there are also numpties there, however it's generally a different vibe and more my kind of vibe.
×
×
  • Create New...