Jump to content
SAU Community

Recommended Posts

 I never use car like this before . How can i make sure everything is ok. There is a rattle noise coming middle of the car i think old owner scract the exhaust pipe . and is there any mechanic for this cars in perth, Also when i change the gear up after push the clutch revs does not going down im not sure it is problem ( im so sorry about my English)

@colin.ssc

Edited by SELSv36
tag
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7910168
Share on other sites

On 07/07/2019 at 1:32 AM, SELSv36 said:

 I never use car like this before . How can i make sure everything is ok. There is a rattle noise coming middle of the car i think old owner scract the exhaust pipe . and is there any mechanic for this cars in perth, Also when i change the gear up after push the clutch revs does not going down im not sure it is problem ( im so sorry about my English)

@colin.ssc

Try KYP in Welshpool. 

Rattle from middle of car could either be cats or exhaust pipes, heat shields or like mine, something in my car is making the rattle. Should be something under the passenger seat. I have not taken the seat out yet to have a look.

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7910392
Share on other sites

  • 5 months later...

I just bought a 2007 370GT S from a mate here in Adelaide. I'm retired so I reckon I will lift the average age of members but you're never too old to learn they say and that's what I'm here to do. This forum has already yielded a mine of information which enabled me to make an educated buying decision. Even though it is 40c+ I can't stop myself going out to the carport to admire the Skyline's curves. Phwoar!

79325630_530015214216795_1823661208578818048_n1.jpg

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7921496
Share on other sites

Hey guys. 

Long time member, occasionally paid when I was in Qld with my R33. I have just bought a fairly decent condition '03 350gt. Looking forward to getting back in to the Skyline world and once again owning something that is fun to drive and I don't just hand over to my local mechanic every 10,000km. I pick it up tomorrow. 

 

Screenshot_20191222-205439_Carsales.jpg

Screenshot_20191222-205429_Carsales.jpg

Screenshot_20191222-205423_Carsales.jpg

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7921737
Share on other sites

  • 3 weeks later...

Hi, newbie here, purchased this v36 a couple of weeks ago, happy so far, fully loaded with sunroof and leather and cruise control. Had English conversion stereo fitted last week which really makes the car, big brakes and 20" wheels. Edit coilovers as well 

 

IMG_20200109_051821.jpg

IMG_20191231_170625.jpg

Edited by Jamest5r
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7922701
Share on other sites

  • 1 year later...
  • 6 months later...

Hi all. I recently bought a 2008 nissan skyline 370gt S. I need a couple of things done. Can anyone help. 
-new steering wheel with cruise control

-GTR style halo tail lights 

- Skyline emblem

- Demon style day time headlights; preferably red

- Language translation to English

I am based in Geelong, Victoria. 
Any help is highly appreciated. 
Thanks

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7956686
Share on other sites

Google or ebay for your items.

There are is lots of info about the language conversion in this forum. But some Audio shop or import shop in Victoria should be able to help.

Some forum members would have all the info you need but they might not come online for weeks or months or ever :( 

 

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7956718
Share on other sites

  • 3 months later...

Hi Everyone,

 

I have a newly acquired 2004 V35 as a daily driver which I acquired from my son as he is now on the path of home ownership. I must say I really enjoy driving this car. I have upgraded the brakes and replaced front suspension bushes and ball joints which have improved the driving. The BOSE radio has failed but I was able to turn it off so the A/C controls are working. If anyone has some advice to offer on the merits of Aepro and Metra double din facia replacements and a good head unit that gives me handsfree phone SIRI and and Apple Car play I would be pleased to benefit from their experience.

Other than that I will be interested in hearing other peoples experiences and learning from them on how to maintain my V35 in tip top order

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7960608
Share on other sites

Welcome.  I think the general consensuses of the metra/aeopro double din fascia is to avoid !!.. they are cheaply made and cause issues.  However, the genuine double din fascias are expensive and hard to come buy.  If you do find one, make sure you are aware the Series1 ( up to 2004) fascia is quite different to the series2/3 (late 04 onwards).

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7960625
Share on other sites

  • 9 months later...

Hi 

I was looking at buying a 2004 Nissan skyline 350gt V35 Auto with 115,000km

Supposedly imported back in 2013 by a small import business there’s only been 1 owner 

also would I have to get engine parts from Japan or can you use all parts from the 350z 

 

Thanks 

Ps This Forum rocks 

 

 

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972635
Share on other sites

On 11/19/2022 at 1:40 PM, Jack151 said:

Hi 

I was looking at buying a 2004 Nissan skyline 350gt V35 Auto with 115,000km

Supposedly imported back in 2013 by a small import business there’s only been 1 owner 

also would I have to get engine parts from Japan or can you use all parts from the 350z 

 

Thanks 

Ps This Forum rocks 

 

 

Yes you can use parts from the 350z but not all parts. Servicing is no different to any other car. The engine is very common.  

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972711
Share on other sites

On 11/19/2022 at 4:40 PM, Jack151 said:

Hi 

I was looking at buying a 2004 Nissan skyline 350gt V35 Auto with 115,000km

Supposedly imported back in 2013 by a small import business there’s only been 1 owner 

also would I have to get engine parts from Japan or can you use all parts from the 350z 

 

Thanks 

Ps This Forum rocks

I owned a 350GT 2003 model for about 8 years (changed Jan 2022). In that time I remember the following maintenance/issues/repairs, and where I sourced the parts:

  • Ignition coils. The first I got directly from the mechanic no probs. Nissan. The others I went on eBay and got NDK
  • Brake Rotors and Pads. No issue. I changed the pad material because the rims were heavily coated in dust. The new ones had virtually no dust, but the squealed like a banshee when cold.
  • Electric Window winders, both sides. Randomly played up (lightly smacked the side of the door to get them  temporarily working), stopped working all art once. I took them out, pulled them to pieces, cleaned them inside (especially around the carbon brushes & springs and the spindle spike), applied an electrical conductive grease (from JayCar), put them together, and remounted them. They worked perfectly after that. I think i got at least 5 more years till I disposed of the car. 
  • Tires. Obviously not an issue...
  • Rims. No issue, but I damaged my previous ones (aftermarket, from Japan when I bought the car)
  • Oil & filters
  • Air filters
  • And really minor things such as window wiper blades.

Thats all I remember. Nothing major, until someone drove "through" the car in a multistory parking garage; and drove off. Apart from a "Good Samaritan" leaving a note on my windscreen with the offenders numberplate, an attendant following them in re-parking on a different level (with lic. Plate), my car was parked right next to the automated pay machine, so it had numerous cameras on it. He / She was fined by the police for their attempted get-away. The reason I tell this story, I had insurance do the repairs. They made 5-10 crappy attempts, and on one of the last failed attempts, I pointed out that at the correct angle, the bumper had waves/light reflection distortions on the surface (long straight florescent tube had a circular reflection). After some arguing, they agreed to correct it. Later, the assessor told me he found "the single last new bumper" in Australia. Which I thought was weird for a car never sold in Aus. ie there were  *possibly* new body panels in Aus,. And why would he continue looking if he found one? insurance pays, not the repairer They eventually gave up and paid me out. After screwing me around for almost a year.

Generally speaking, I never had issues with parts/repairs. Its a Nissan, and they try and re-use parts between what they sell, inc locally.

Edited by Vee37
  • Like 1
  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972800
Share on other sites

1 hour ago, Vee37 said:

I owned a 350GT 2003 model for about 8 years (changed Jan 2022). In that time I remember the following maintenance/issues/repairs, and where I sourced the parts:

  • Ignition coils. The first I got directly from the mechanic no probs. Nissan. The others I went on eBay and got NDK
  • Brake Rotors and Pads. No issue. I changed the pad material because the rims were heavily coated in dust. The new ones had virtually no dust, but the squealed like a banshee when cold.
  • Electric Window winders, both sides. Randomly played up (lightly smacked the side of the door to get them  temporarily working), stopped working all art once. I took them out, pulled them to pieces, cleaned them inside (especially around the carbon brushes & springs and the spindle spike), applied an electrical conductive grease (from JayCar), put them together, and remounted them. They worked perfectly after that. I think i got at least 5 more years till I disposed of the car. 
  • Tires. Obviously not an issue...
  • Rims. No issue, but I damaged my previous ones (aftermarket, from Japan when I bought the car)
  • Oil & filters
  • Air filters
  • And really minor things such as window wiper blades.

Thats all I remember. Nothing major, until someone drove "through" the car in a multistory parking garage; and drove off. Apart from a "Good Samaritan" leaving a note on my windscreen with the offenders numberplate, an attendant following them in re-parking on a different level (with lic. Plate), my car was parked right next to the automated pay machine, so it had numerous cameras on it. He / She was fined by the police for their attempted get-away. The reason I tell this story, I had insurance do the repairs. They made 5-10 crappy attempts, and on one of the last failed attempts, I pointed out that at the correct angle, the bumper had waves/light reflection distortions on the surface (long straight florescent tube had a circular reflection). After some arguing, they agreed to correct it. Later, the assessor told me he found "the single last new bumper" in Australia. Which I thought was weird for a car never sold in Aus. ie there were  *possibly* new body panels in Aus,. And why would he continue looking if he found one? insurance pays, not the repairer They eventually gave up and paid me out. After screwing me around for almost a year.

Generally speaking, I never had issues with parts/repairs. Its a Nissan, and they try and re-use parts between what they sell, inc locally.

thank you so much this is so helpful 

Link to comment
https://www.sau.com.au/forums/topic/191705-newbies/page/50/#findComment-7972802
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...