Jump to content
SAU Community

Recommended Posts

spotted ARE32 on gravatt-capalaba road inbound at about 1.30am last night

pulled up beside to see if it was who i thought it was and was also tired as shit from coast cruising all night and didn't notice a slight bend in the road

nF chased me halfway across the city, i guess he thought i was trying to ram him or something =P

uh no, but nice driving dickless

i was driving home which just happened to be the same direction as you were heading

Spotted a very neat R32 GTR inbound on the Centenary this afternoon. Waved but got no reply...... Saddens me it does...... even when we were stuck in traffic at Everton Hills he wouldn't wave. Elitist GTR owner?

Also spotted ARE32 near his workplace today, waved but I shouldn't have, as his reply to Einstein obviously trying to apologise was harsh. Michael, you need to be nicer or when that junker you get away with driving on the street finally dies, no one will stop to help you. Have a nice day :D

I think the 'have a nice day' bit was the most devastating part

it was all like "yeah shouldnt have waved" which is rude, then its like "your cars a junker" which is really rude (especially combined with the"get away with driving" part) and then the "have a nice day" was like BAM! K.O!

what a post! Im pretty sure theres no way to get back from an Internet Flame like that

Edited by maxe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...