Jump to content
SAU Community

Recommended Posts

Welllll I just saw squizza old cefiro, 3 streets from my house, and then just down at 'da plaza' I saw SHY 32, but I liked it better with the black stockos on it, not the chrome :D.  Crazy I say whats going on with browns plains!  cause there is a nice R33 GTR just up the road too... and a bright green R34 sedan.

Browns Plains is getting huge now, plenty of skylines around...who else on here is from Browns Plains?

Browns Plains is getting huge now, plenty of skylines around...who else on here is from Browns Plains?

It feels like ages since i have been to BP. I might be up that way on the weekend.

Welllll I just saw squizza old cefiro, 3 streets from my house, and then just down at 'da plaza' I saw SHY 32, but I liked it better with the black stockos on it, not the chrome . Crazy I say whats going on with browns plains! cause there is a nice R33 GTR just up the road too... and a bright green R34 sedan.

the black stockos should be good skid wheels :D

was the 33 GTR purple? If so then its brett's (klayman)

there used to be wikid grey 32 getting about the stains, but it think it moved to the coast earlier in the year ;)

It feels like ages since i have been to BP.  I might be up that way on the weekend.

the black stockos should be good skid wheels :)

was the 33 GTR purple? If so then its brett's (klayman)

there used to be wikid grey 32 getting about the stains, but it think it moved to the coast earlier in the year ;)

yeh that grey one was siiiik!! :mad:

Zoix - where's bouts is wakerley?...

Saw a silver R33 GTS25T on browns plains rd today bout 4 ish...plates 688HJU.....has the www.skylinesaustralia.com sticker on the back window......no where near centered tho.....

wastes the look of both the 'line AND the sticker

OK Spotted:

Friday night Red 4 door R32 plates were RED32 at Beenleigh Marketplace ~7:15pm

Saturday Morning:

Black R33 Southbound on M1 ~Waitland Street exit (I was nothrbound) ~7:15am

Sliver R33 S2 (Owned was this you looked exactly like your car) Again it was taking the 8 mile plains exit southbound on Gateway (Just before it meets the SE Freeway) ~7:30am

Gunmetal Grey R32 Northbound Bruce Highway between Deception Bay Exit and Burpengary Exit Plates were WIK32 hot HOT chick with white blonde hair, did not even look just stared forward when I waved, not even a glance so she prolly didnt even notice me :) ~8:00am

Wine Red 33 Northbound on gateway just after the first onramp after bridge ~11:30am I was southbound.

End of Report :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...