Jump to content
SAU Community

Recommended Posts

I'm over jap cars! When you go prestige you will never go back.

Try it one day you will know what I mean - Then realise you use to be a hoon - Then realise why everyone hates them and join them hating them. :-)

Jap cars were good 5 years ago when everyone left you alone but now everyone is against them.

Go prestige - No defects - No EPA's - Save on Petrol. And all you need to do is put a set of sexy wheels on.

Wholeheartley agreed.

I don't own any prestige car at the moment but I am hoping to buy a 2006+ Bmw series 3 by end of this year fingers crossed. For the amount I'm going to spend, i could perhaps own a evo x as i believe jap cars do have the sheer grunt and power, no one can dispute that but end of the day, they severely lack in class and looks.

I am beginning to notice more Audi, Merc and Bmw's in Melbourne's inner cbd and it's surrounding vicinity.. This city is slowly but surely transforming into a high class city, after all, it is Australias fashion capital.

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

I think the Bmw's new 3 series look great with its smooth curves.

bmw-3er-silver-exterior.jpg

Edited by Barbarian
  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

Driving a jap car around the more affluent suburbs full of German cars is great because there aren't anywhere near the amount of police around to hassle you as there are compared to suburbs where most the streets are scorched with burnt rubber.

That is except for anywhere around Chapel Street and Dandenong road

I am beginning to notice more Audi, Merc and Bmw's in Melbourne's inner cbd and it's surrounding vicinity.. This city is slowly but surely transforming into a high class city, after all, it is Australias fashion capital.

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

What model are you going to be going for in the 3 series?

Correct me if i'm wrong but top spec (before m3) is the 335i (twin turbo 6cylinder). These do come in sedan form aswell correct?

Whatever you buy just make sure it's black :P

Yes I will give you the fact that Euro cars are prestige etc.However thats about it.I been behind the wheel of a few of them and honestly they are just ordinary cars that are ridiculously overpriced.Sure they may be a little quieter than most cars.And as far as build quality.they went down the toilet years ago.Ask anybody who ever works on one-They are just as big a shitheap as any falcadore.As far as I am told most of the mercs get their parts from Korea.I used to work in an unnamed company that had 50 Merc Sprinter vans...Every one of them blew gearboxes before hitting 100000 km..! ( $15000+ for the tiptronic auto )Then the diesel fuel injection systems started shitting themselves as well as computer glitches that wont allow it to go out of nuetral, doors that dont shut properly. I think VW is the best quality car in Germany right now...At least they are reliable

Im not over Japanese cars, but I am on a "break" from them, after nothing but turbo cars for the past 13 years its kinda nice to be driving a N/A v8 for a change. My Xr6t changed my mind on the whole japcar scene, I really dont go 'driving' much at all these days, most of what i seem to do is boring stuff to & from work etc....

Must be getting old! :P

Who else is feeling the same symptoms?

They just don't seem to have that "classy" or "elegant" touch in them, no matter what car or what brand, it's still a Jap car end of the day.

When driving around in Melbourne's higher class suburbia, you feel like a foreigner in your Jap vehicle.

sounds like you're trying to ' keep up with the jones's.' does it really matter what other people think about what car you drive.

if you drive an modified import you're pigeon holed as a hoon, if you drive a prestige car you pigeon holed as a snob.

personally i think prestige cars are rediculously overpriced and a complete wank, where you often pay >60K for something with a 2.5 litre engine, a hole bunch of electronic gadgets that break soon after the warranty runs out, and a brand name that's supposed to say 'look at me i'm successful'

maybe i just feel that way cause i work in 'upper class' mosman (sydney), and serve alot of customers owning poodles, driving bmw's/mercedes with superiority complexes

not trying to be rude, maybe i'm reading it wrong, i don't know, and that you meant you're in the market for a car that has a nicer interior and that looks more civilised than an evo etc??

lol as if a run of the mill predominantly junior marketing intern owned 3 series beemer is a sign of luxury. that's like assuming sipping cheap champagne in copious amounts at melbourne cup day can turn you from a skank to a lady.

down the track i'd be definitly considering a higher class euro car with some balls and hopefully be in the position to keep the liner as the fun weekender. i just want to drive a pimped out audi merc beamer or bentleigh's like all those rappper's do before lights out.

Ummm the Quality?

Its just like saying what can you get in a Skyline that you can't get in a Holden in the same price range?

your comparing lemon's with mango's

wat quality?

2 of my mates bought a 318i and a holden statesmen of the same year from the same dealer. the bimmer's broken down 3 - 4 times already and cost about 3 grand to fix. the stato's runnin like brand new. not saying holdens are better or that i'd ever choose a holden over a euro but yeah...

quality my arse, you think all mercs are bulletproof just coz they're mercs? they're made in mexico ffs

just my opinon but if i was to ever go euro i'd get somethin from the $100K+ range and from italy but since i dont have that sorta money ima stick to what i can afford lol

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

bmw-3er-silver-exterior.jpg

I live next to the city. I drive an r34. The cars in my apartment carpark are, Porsche GT3, Porsche 911, bmw M6, bmw 3 series, 5 series, 7 series X5s, mercs e class, s class, you'll prob end up a millionaire if there's a grand theft auto :blink:. Anyway, I don't feel anything at all. We drive pass each other looking at each other's cars with a smile in our face.

I'm still young, not even mid 20s yet, i feel that driving an import at our age is perfectly fine. However, when i reach my late 20s, i'll be planning to get a euro car BUT still keeping an import as a toy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...