Jump to content
SAU Community

Recommended Posts

Well, based on youtube footage im more excited by this footage then i was of the GTR :)

The sound and styling are very appealing. Only will it be able to match the performance of the GTR? Highly unlikely. But great sounding V10 with roll over technology from F1 means its likely to get a funky semi auto gearbox as well. But the sounds coming out of the V10!!!! I have read its about 5L.

So, will be interesting to see if its release makes a dent in the GTRs appeal?

http://au.youtube.com/watch?v=87y4XWEhgfA

Link to comment
https://www.sau.com.au/forums/topic/202248-new-supralexus/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

wow ur like 2 months behind on this - its already whooped the gt-r around the nurburgring by getting a 7.28 or something insane like that, but its an unofficial time. its a 4.8l v10 that revs to 9,000. and yes, its cooler than the gt-r, and its gonna cost more too, but guess what it gets cooler - honda are working on a new model nsx to be released in 2009-2010, same time as this weapon comes out.

Edited by izataskyrine?
Link to comment
https://www.sau.com.au/forums/topic/202248-new-supralexus/#findComment-3591836
Share on other sites

If the thing is that quick then i would assume its going to be a 180-220k car? Any indication on pricing. Instantly im in love with the styling and the sound. I was expecting Nissan with a clean sheet to design to the GTR woudl come up with more modern Zed / aggressive sports car look then an angular The Thing (from Fantastic Four).

Link to comment
https://www.sau.com.au/forums/topic/202248-new-supralexus/#findComment-3592033
Share on other sites

GTR = Stays true to its family genes

Supra = Has sold out cause it ain't good enough, is more German/Italian supercar than JAPANESE.

If Nissan stuck a V10 in the GTR, would anyone stand a chance?

Maybe...but that can be taken a few ways. Nissan goes 2L in-line 6 cyl, NA RWD GTR, in a hotted up floorpan. (original sweet sounding thing it is) Then the next GTR is AWD 2.6L 6cylinder car, again modded from a mass produced chassis on through to the R34. Then a huge leap in asking price, V6 3.8L on a unique platform / chassis.

So then the Supra has always been a big rwd 6 cylinder, which grew some turbos in later years but was always built on its own platform. Now it has gone V10, and is still a big rwd car that looks to beign built on its won platform. Its had a change in engine configuration, to me its stayed just as true to its earlier generations as the GTR has. I woudl say perhaps its been more loyal?

And i dont get the Japanese v Eurpoean thing. Japanese as in computers doign tricky things with driven wheels for traction etc? Of late yes, but the R32 GTR's driveline and awd system was suspiciously similar to a certain 959 Porsche. And the old song of yanks go for displacement, Europeans use engineering and style, the Japanese functional technology etc, well the 3.8L GTR is getting up into the big displacement world of forced induction. Porcshe, Lotus etc all run smaller displacement on their twin turbo sports cars.

So, i dont see the merit in those sorts of arguments...as they all move with the times and the market they are catering to. Personally, i will lvoe to see Toyota do a number on the awd boys using a well developed rwd platform with some smarts in the traction systems learned from their years in F1 and sports cars :)

Link to comment
https://www.sau.com.au/forums/topic/202248-new-supralexus/#findComment-3592103
Share on other sites

That sounds soooo f**king good!

tho doesnt sound so automatic like the gtr. really sounds like a h pattern shifter

lol what? there are no gear changes I can hear in that vid? plenty of lifting off before a corner. there was one faint up shift that sounded just like any paddle shift to me but it was very faint, and I didn't hear any down shifts.

cool car though, I will be very impressed if the production version sounds like that.

Link to comment
https://www.sau.com.au/forums/topic/202248-new-supralexus/#findComment-3592200
Share on other sites

and this is the reputation out skylines have traded on for years. sure one now costs about the same as an R35 and no where near as fast, but I'd wager it's 5 times the fun. AND that is how a GTR should sound. gives me goose bumps.

http://au.youtube.com/watch?v=byJ5NH5t37U

Link to comment
https://www.sau.com.au/forums/topic/202248-new-supralexus/#findComment-3592206
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...