Jump to content
SAU Community

Recommended Posts

  • Replies 569
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

congrats on your efforts at superlap guys.. well done, was the highlight of the day

car looked, sounded and went awesome.. and the sponser stickers were applied well... didnt take away from the car at all... good to see all the hard work and $$ paid off in the end.

didnt look like oran park suited it though.... kinda like it just had too much power and spent most of the time either lighting em up or washing off acceleration.. maybe on a flatter track like tsukuba it would be a force to be reckoned with... sooo whens it going on the boat??

cheers

Linton

i have a tiny clip of it but unknowns to me it was about to pull into the pits... so its worthless.

speaking of sounding great down the straight.... what the hell was wrong with the Gracer r33??? it sounded terrible.

Think the guys didn't have a chance to put in a 4wd controller so it was running standard torque split. Not great for track times but made it look like a LOT of fun to drive ripping it very sideways while accelerating coming onto the straight.

Well done though Russ and Mark. Car looked great, looked like fun to drive and it still worked at the end of the day- a decent feat for its first competitive outing.

The boys changed the transfer case on saturday in the hope of getting some front drive. Didn't help much, the best they could get was 10% or so directed to the front. That's why you see pics of it black-tracking everywhere.

question was there something wrong with the transfer you seem to have alot of problems geting the power down out of bends

besides that it looked and sounded awsome

yeah, there is something not quite right with awd. not exactly sure what but it's not getting enough front drive. we changed transfer case on saturday and it was a little better in the morning, but not much. mark reckons possibly a sensor failure or awd ecu not receiving an input (like TPS) as it's getting some pressure but not enough, which means it's baking the transfer case which means it gets worse and worse. on top of that they have a fair bit more torque than before and trying to put that power down on 265 semis is not easy, hell even some of the evos which are much lighter and with less toque run 285s!

the car went so well for it's first outing. nothing broke and apart from the little awd issue it ran absolutely perfectly. a credit to mark and russ for their hard work and all the other guys who worked on it too. mark drove the absolute wheels off the thing too and watching the in-car last night just goes to show he must have a giant set a it looks scary to drive. scary fun that is.... :D i'm sure russ will post some when he gets home, but i'd say the car is wheel spinning about 3/4s of the time! It's sideways from turn 5 all the way up the hill and onto the bridge through 3rd and 4th. then sideways off the bridge all the way to the S.

and yes cnj tune it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...