Jump to content
SAU Community

Recommended Posts

Saw a nice gunmetal grey 33 heading into town around 10am on main north road, exchanged nods with the driver before turning off to my destination

saw a young lass with a bright yellow s14 in the bp on magill/portrush road... said 'nice car' to her and had to poq... was indeed a very fine specimen of s14 (tho im biased, i like s14s more than 13s or 15s)

-D

seen chad (dstroy) today on sturt road near marion shopping center i was crossing the road wasnt in the stag

:D I seen ya, first day i've driven the skyline to work for about 6 months.

spotted a black r33 with p plates noarlunga area

teal r33 yuk

kermit green 180 stock wheels mclaren vale,, double yuk

think I saw Ryan in his R33 yesterday ??? down south

black 4dr r33, soccer mum on states rd

Mr nice policeman who drove past me while I was parking at O sulley beach rd shop, then while I was in shopping, decided to turn around and park next to me. no defects or hassles.... but my heart stopped when I came out to see him parked there in a empty car park next to me.and out of the car.

the whole back insides of my car is taken apart too..lol

I think the sound deadener silver foil reflection off the back window prob attracted his attention a tiny bit...hahahahah

OOPS!!!

spotted my car in my garage missing most of its front end... :)

shit, sorry, wrong thread.

spotted 'NIZMO' (pink 33) at the main north/uley road intersection turning onto main north at about 1 or something.

had a white 34 4door next to me last night going down unley road, spotted a grey 32 out the front of blackwood dyno, went past a black 33 turning onto south terrace from pultney st, spotted a white ceffy heading towards the city down unley rd, and then saw a maroon 32 with white wheels heading towards the city on belair rd tonight around 6

I'm sure my car wasn't there that night as I was getting rather hammered... You mean you spotted me? If so why didn't you come say hi?!?!? :happy:
HAHa yeah you not the line... I waved and u waved back you goose haha. Great night!!!
Hey carl,

Yeah the cefy is off defect (thanks guys for ur support as well, when i needed to borrow parts :) )

Not sure about brad (gave him a msg through :happy: No reply... Pr!ck lol) ill find out if he is off though!

I was sooooo lucky i got off hey!

yea brad didnt reply to my message a while ago.

think he may have found a few things that wouldnt pass.

would love to get those wheels off of him tho. have some others that would pass sittin here :)

HAHa yeah you not the line... I waved and u waved back you goose haha. Great night!!!

:happy: I remember now! I recall thinking at the time, who is that!?!?! I didn't want to be rude so I waved back. Sorry I was well on my way... :)

spotted a few today, only got brief glances. Am on site at the earthworks for the Riding for the Disabled Association on Majors Rd O'Halloran Hill (yes, playing in green for a few days)

yellow Dayz Stag heading towards south road about lunchtime

maroon 33 with duck tail spoiler heading west about 4:30

black 32 with black wheels heading towards south road not long after

yea brad didnt reply to my message a while ago.

think he may have found a few things that wouldnt pass.

would love to get those wheels off of him tho. have some others that would pass sittin here :P

Well i got off today which im stoked about. Wooooo. I didn't reply to your message Ryan coz i was being slack. Haha. And you are a prick too. LOL. Oh and damn do those rims look hot now. Mmmmmmm... I took the spacers out lol. What were they in there for anyway??? For looks or to stop rubbing???

Edited by MSTR32
Mine has Xenon's but the the globes get taken out for compliance.

Spotted today a Bayside blue 34 4 door at Belair, white 34 2 door driving behind me past Windy Point and red Stagea (RSFOUR) going up Flagstaff Hill rd

old reply but.. mine has xenons cause i asked the compliancer to put them in the back of the car when they were done :P

spotted a black r33 with p plates noarlunga area

teal r33 yuk

kermit green 180 stock wheels mclaren vale,, double yuk

think I saw Ryan in his R33 yesterday ??? down south

black 4dr r33, soccer mum on states rd

Mr nice policeman who drove past me while I was parking at O sulley beach rd shop, then while I was in shopping, decided to turn around and park next to me. no defects or hassles.... but my heart stopped when I came out to see him parked there in a empty car park next to me.and out of the car.

the whole back insides of my car is taken apart too..lol

I think the sound deadener silver foil reflection off the back window prob attracted his attention a tiny bit...hahahahah

OOPS!!!

Hehe, black 33 with P Plates in Noarlunga would have been me :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...