Jump to content
SAU Community

Recommended Posts

There is not a great deal you can do without besides the ABS, air conditioning etc its more about saving weight.

Besides the obvious, you can strip the loom and rewire with the bare essentials. you'd be suprised how much wiring is unused once you remove the HICAS, ABS etc.

Single turbo conversions are lighter than typical twins.

Stick with alloy piping if possible.

Carbon canisters can be removed as well as the piping

Heater hoses and other water lines if you have stripped the inside out

Washer bottle and hoses.

Smaller battery

You can pretty much take anything out thats not needed if your building a circuit car.

Guys,

when removing the carbon canister do you just block the outlets or do they need to be reconnected somewhere

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

concept. will await this reply!!

and would like to know about the carbon canister too. mines floating around somewhere in my engine bay hardly attached to anything

I don't get the rush for the c/f tailshaft unless you have too much money to spend.

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

Because I just want to be able to say to girls:

"Yes that's right ladies......... I have a carbon shaft. Form an orderly line to the left, and no pushing."

either way its still weight i want to get rid of as thats my main goal for now.

and on the plus side, single piece shaft rather than the current.

and barron, a light weight clutch/flywheel would be somewhere 5x (+++) the cost of the shaft correct?

No Angus i just put a 4.2 kg alloy flywheel on for 500$

http://www.vividracing.com/catalog/acpt-ca...r32-p-9406.html

Is there anywhere in australia that makes them? Or just US shops? I'd like one, but I doubt they're off the shelf items for my car.

hey, since my car has a r34 gearbox in a r32 i need an odd sized one also.

so get your length of your shaft right and i can forward on to him if your interested. as i've told him i need an odd sized one too.

$1400 !

Thats very good.

People spend more than that on making thier GTR look faggy.

A carbon tailshaft is well worth the money. Manufacturers are using them now on fairly cheap sports cars for the range of benifits they offer.

I've got this on my list of mods for my R32 GTR bunky and I'm only building a 300rwkw car.

any chance one of you guys know how much a bare and empty r32 gtr fuel tank weighs ?

Titanium exhaust = 23 ks

but surely you can get lighter exhausts? i've got a 3" zorst that weighs 12kgs ( not inlcuding cat, front pipe, dump pipe)

Edited by Dan_J
he was saying 23kgs is the amount of weight saved. most titanium systems would be under 6kg.

oh ok thanks for clearing that up

at a guess i would say a bare gtr fuel tank is 12 to 14 kg.

you wouldnt have a spare one that u cud just wack on sum scales to double check? :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
×
×
  • Create New...