Jump to content
SAU Community

Recommended Posts

There is not a great deal you can do without besides the ABS, air conditioning etc its more about saving weight.

Besides the obvious, you can strip the loom and rewire with the bare essentials. you'd be suprised how much wiring is unused once you remove the HICAS, ABS etc.

Single turbo conversions are lighter than typical twins.

Stick with alloy piping if possible.

Carbon canisters can be removed as well as the piping

Heater hoses and other water lines if you have stripped the inside out

Washer bottle and hoses.

Smaller battery

You can pretty much take anything out thats not needed if your building a circuit car.

Guys,

when removing the carbon canister do you just block the outlets or do they need to be reconnected somewhere

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

concept. will await this reply!!

and would like to know about the carbon canister too. mines floating around somewhere in my engine bay hardly attached to anything

I don't get the rush for the c/f tailshaft unless you have too much money to spend.

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

Because I just want to be able to say to girls:

"Yes that's right ladies......... I have a carbon shaft. Form an orderly line to the left, and no pushing."

either way its still weight i want to get rid of as thats my main goal for now.

and on the plus side, single piece shaft rather than the current.

and barron, a light weight clutch/flywheel would be somewhere 5x (+++) the cost of the shaft correct?

No Angus i just put a 4.2 kg alloy flywheel on for 500$

http://www.vividracing.com/catalog/acpt-ca...r32-p-9406.html

Is there anywhere in australia that makes them? Or just US shops? I'd like one, but I doubt they're off the shelf items for my car.

hey, since my car has a r34 gearbox in a r32 i need an odd sized one also.

so get your length of your shaft right and i can forward on to him if your interested. as i've told him i need an odd sized one too.

$1400 !

Thats very good.

People spend more than that on making thier GTR look faggy.

A carbon tailshaft is well worth the money. Manufacturers are using them now on fairly cheap sports cars for the range of benifits they offer.

I've got this on my list of mods for my R32 GTR bunky and I'm only building a 300rwkw car.

any chance one of you guys know how much a bare and empty r32 gtr fuel tank weighs ?

Titanium exhaust = 23 ks

but surely you can get lighter exhausts? i've got a 3" zorst that weighs 12kgs ( not inlcuding cat, front pipe, dump pipe)

Edited by Dan_J
he was saying 23kgs is the amount of weight saved. most titanium systems would be under 6kg.

oh ok thanks for clearing that up

at a guess i would say a bare gtr fuel tank is 12 to 14 kg.

you wouldnt have a spare one that u cud just wack on sum scales to double check? :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...