Jump to content
SAU Community

[group Buy] Acpt Carbon Fibre Tailshafts Any Model! $1400us


Recommended Posts

1000HP = $1,290.00

2000HP = $1,390.00

that is the final pricing i have also! so I've screwed it a little further for everyone!

looking like we will get this underway quiet soon!

I need to keep this all nice and neat

I will update the list i have at work tomorrow and check that its all correct and its what everyone has asked for.

  • Replies 717
  • Created
  • Last Reply

Top Posters In This Topic

Dr R - 2000hp r34 Gtr - with holinger (need to confirm difference in length asap)

Piggaz - 1000hp r33 Gtr

Star32 - 2000hp r32 Gtr

* - 2000hp r32

* - 2000hp r32

Merli - 2000hp r32

Sly 33 - 2000hp r33

Mr Keets - 2000hp r32

Arep - 2000hp r32

Myself - 2000hp r32

thats is the 10 and i'd say we're just about ready to go..

I guess i'll contact you all and start the ball rolling!

Cheers

Andrew

Yerr i just got lazy haha they are all for gtr's

Probably going to be looking at friday to start payment :thumbsup:

Edited by Angus Smart

i'll pay you the funds andrew but will it be ok to tell you the length later on???

Boys need to figure out which shaft to use as we are still waiting for the box to arrive from overeast.... should be here in a week

I'm pretty attractive :yes:

how do we all want to do this? one lump? or deposit then payment apon confirmation when all made and ready for dispatch?

i'm easy either way tho keeping track of one lump would be alot easier.

Full payment up front. Don't make life hard on yourself.

Just make sure that you don't pay the full invoice until you take delivery!

I've had suppliers flake out and take AAAAAAGES to deliver the goods if they get paid in full up front :D

On that note, what *IS* the expected delivery lead time?

What do the ACPT need for a deposit? I'm happy with all up front. Less stress for you mate. But, as above...payment on delivery to you or deposit or partial payment to ACPT

My OSG kit will go in at the same time :D

they said 500 on each than the rest when ready. which sounds good to me.

i'll crack up a pm tomorrow with details etc to get this going.

i've got to also wait on dr r with regards to his shafts length.. hehe..

they said 500 on each than the rest when ready. which sounds good to me.

i'll crack up a pm tomorrow with details etc to get this going.

i've got to also wait on dr r with regards to his shafts length.. hehe..

I'm waiting on Jim at Croydon to get back to me, they were busy on Friday. Same situation as RH9 back in the day so they will give me the magic answers...

So when do they think they will be finished and delivered?

Are we doing full payment up front. i dont mind which way as long as it doesnt take forever...

I'm about ready to order i guess, but people keep on wanting to join.

just working on a mass pm now to everyone now with all the details for me and payment etc.

Cheers

Andrew

Ok so i've just sent out the first lot of pm's with all the details in it.

if i have missed anyone please let me know!

Cheers

Andrew

Can someone who has their ear enquite about one for an R32 GTSt runnig an RB25 gearbox? If they have done shaft of the required length then i am in

get me the size roy, and they will do custom length :(

I'm waiting on Jim at Croydon to get back to me, they were busy on Friday. Same situation as RH9 back in the day so they will give me the magic answers...

So when do they think they will be finished and delivered?

Are we doing full payment up front. i dont mind which way as long as it doesnt take forever...

RH9 is at the back of the shop cant get measurements. Holinger arrives next monday. I am in either way just got to put the box under the car and measure and we are on the way. Andrew as i said today i will transfer via commbank total and sms you the measurement

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...