Jump to content
SAU Community

Recommended Posts

ok now we all know that the PFC is the way to go for ultimate tuning but PFC's are getting pretty hard to find these days for a R33 GTST so my question is whats the next best thing to use if one cant find a PFC???

do i just stick to a piggy back or is their another replacement ECU that can be compared to the PFC???

ta

Ash

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/
Share on other sites

Depends what your aims are... for your everyday streeter with a hi-flow turbo, slightly bigger injectors etc. an E-Manage Ultimate would be more than enough. If your going to make big power it would be better to spend the extra money and get something that's suited for tuning big turbo's i.e Autronic.

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3708492
Share on other sites

PLEASE DONT GO A EMU DUDE THEY SUCK BALLZ.

no one tunes them. it is VERY hard to tune, i was quoted that they needed 3 days to do the tune!!!!!. it bollocksed up my ecu. made error codes. then removed it and ran just stock ecu and it runs.

so im going a power fc.

good thing im getting my money back on the EMU. whoo lesson learnt. just because its new doesnt mean its good.

BUT. have heard nothing but good news on the e11v2. i believe the ignition jet200 uses one.

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3708652
Share on other sites

go the powerfc, sorry wins hands down in most cases unless you can afford wolf 3d, autronic, motec

it just seems with the other piggyback style systems you need to find a competent tuner

then you are back to the old remap style issue where only 1 or 2 workshops can do / fix it / tune it

so your stuck with lack of competition, options and alternate/cheaper pricing

if i was to do another car , powerfc no questions

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709048
Share on other sites

powerfc is old and overpriced.

E-manage Ultimate is the best replacement for the pfc.

people seem to think it just another safc but it is far from that and is alot better than the pfc in my books. able to have more than one map sorted in the ecu and change maps on the fly by a flick of a switch, launch control, ignition cut limiter just to name some of its features.

seem one in action and if the tuner knows what he/she is doing they are a great ecu. their are cars in Japan running over 500hp with the ultimate (Trust/Greddy D1 s15 for example)

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709101
Share on other sites

Apexi PFC - stand alone/plug & play

Wolf 3d - stand alone/plug & play

Greddy E-Manage Ultimate/blue - Piggy back

powerfc is old and overpriced.

Old & over priced?

I'd say one of the best value for money ECU's on the market - it does everything a stand alone ECU should do without any fancy unnecessary useless features

Its been around for years and will be for many more to come

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709201
Share on other sites

Apexi PFC - stand alone/plug & play

Wolf 3d - stand alone/plug & play

Greddy E-Manage Ultimate/blue - Piggy back

Old & over priced?

I'd say one of the best value for money ECU's on the market - it does everything a stand alone ECU should do without any fancy unnecessary useless features

Its been around for years and will be for many more to come

when was the last time apexi update the powerfc? And last time a check Apexi are no longer producing alot of its PFC models

best value for money? no thank you $1500 for a basic ecu (r33/r34 prices) - when you can get the ultimate which does exactly the same as what the pfc does for alot less ($1000 or under) oh and it has more function than the pfc too

so what is the greddy is a piggy back? why does that make such a bad ecu?

Edited by [Michael]
Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709220
Share on other sites

when was the last time apexi update the powerfc? And last time a check Apexi are no longer producing alot of its PFC models

best value for money? no thank you $1500 for a basic ecu (r33/r34 prices)

so what is the greddy is a piggy back? why does that make such a bad ecu?

Never said it was bad, I'd prefer to go a plug and play over something that cuts into your loom

Also for EPA/defect reasons

+ installation for the E-MANAGE - its just easier to go a plug and play and might even work out cheaper

Unless you want to pay for the wiring harness etc - by the time you get all that, you might as well spend a little more and go a stand alone ECU

$1,500 is an overstatement, if you look hard enough you will find one for cheaper than that

I know someone who bought one off this forum for $1,000 brand new with HC - that wasn't to long ago either

I also bought a AP Engineering one for $1300 delivered - people are asking anything up to $1600, it just depends on how hard you look

Basic ECU if you think so but it does everything you need it to do for a tuned street/track car

If you were going all out with a spastic track car - 1000hp style then I'd say AUTRONIC or MOTEC but whats the max he will go with an RB25, 300wkw maybe?

PFC is more than capable of handling that

Updated? What for - it does what its designed to do and always has

Link to comment
https://www.sau.com.au/forums/topic/209764-pfc-alternative/#findComment-3709239
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
×
×
  • Create New...