Jump to content
SAU Community

Recommended Posts

i have spotted a head of v35's in the last few months mate of mine has a silver one another mate i work with purchased a red one.

but in particular i spotted a White coupe with a different exhaust of some kind on southern cross drive in sydney number plate CPV 35L

  • 2 weeks later...
Spotted 2 silver V35s in city yesterday. One was stock standard edition. The other one was also stock apart from the exhaust and the guy was on green p-plates.

which city? tried to get into city (sydney) yesterday, about half the roads and bridge is blocked due to WYD .... :D

Spotted a silver V35 coupe parked on Toorak Road South Yarra yesterday (23 July) around 11:30am

Was on the way to Vicroads from SSVI during my 13 weeks registration ordeal... that hasn't come to an end yet...

  • 2 weeks later...

While driving to work (in my wife's RAV4) spotted a silver V35 coupe just like mine waiting on William St traffic light at the tramstop after Vic.Market.

Not sure if that's the same V35 coupe I've been spotting recently around Dudley/King St & surrounding at some mornings?

Not sure if

  • 3 weeks later...
  • 3 weeks later...
Spotted a blue coupe yesterday turning from dudley into king st in the city.

Same blue coupe changed route, spotted it going through one side of jeffcot st to another side, crossing the spencer st just beside correctional centre.

Spotted a very Sexeh black coupe :P at Garden City last weekend. WOW nice ride whoever owned that. They are very tight in black.

I saw a silver v35 4 door and he spotted me in my silver coupe just off Warrigal Road, he was turning left off. We both slowed down to admire :D

Damn these are sexy cars!

Edited by Data Queue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...