Jump to content
SAU Community

Recommended Posts

you mean red top SR20, right?

Its a Red R built forged CA18, it was going to be the drag car but now is used as a daily. Its an S13 Silvia with a few GTR bits bolted on. We got pulled over in it on Saturday night when Paul was running me home but as it appears to be totally stock they left empty handed, lol.

Edited by blitzxtr

I have ordered a ASR RB30 Custom Race sump. Should take about a week to fabricate once it lands in Vic.

8.5L capacity, heavily baffled, windage doors. Boxed around the pickup. Also modified pickup.

Paul also decided to half grout fill the block, he was doing 2 other engines and had some left over lol

Looks like a new turbo setup is on the cards as this bottom end will be laughing at anything the 35R can throw at it.

NOTE: Selling a Brand New set of CP RB25 pistons. $1050+post.

16 valve :D

Must be an oldschool silvia or something.

Ah...didnt look closely enough

The new turbo wont be happening for a while. But when it does it will be a HKS T51R KAI.

Ohhh nice...what about somthing Twin Scroll though? like a 4088 or something?

Paul has a history of making at the tyres what the HKS turbo's are rated at the engine, the head needs the right little tricks though. Put the 25 head on then save some cash for the big head...or when Paul is not looking steal Twoogle's!. lol

Dave, 800whp response monster, should be fun at E.C. lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...