Jump to content
SAU Community

Recommended Posts

Yea, flamin mongrel is quick. hehe

As for the car, senior officer gave him one month to take off all the mods and bring the car back to willy cop shop for an inspection. He didnt want to give him one week as it woukld be almost impossible to fix up in 5 days. Poor flamin mongrel haha, maybe when its stock il be able to give him a better run :blink: I was tripping out, this coppa new these cars inside out. lol

mustve been a nice cop to pretty much "let him off" in the way of no defect/epa and just make him come back to the cop shop and show him the car again.

still a hassle though taking everything off and making it standard.

Yea, flamin mongrel is quick. hehe

As for the car, senior officer gave him one month to take off all the mods and bring the car back to willy cop shop for an inspection. He didnt want to give him one week as it woukld be almost impossible to fix up in 5 days. Poor flamin mongrel haha, maybe when its stock il be able to give him a better run :blink: I was tripping out, this coppa new these cars inside out. lol

What about the mods made them illegal? On p's or just not done with EPA in mind etc? I've always wondered this. If p's are gone. N u enclose your pod n do everything proper. They've got nothing to get u on. Or am I mistaken? Sumone fill me in. LOL.

last night saw a white r34gt at fountain gate driving around near magid drive and also a dark colour r32 with sau stickers at fountain gate maccas. gave it a little bit as they were leaving the car park lol.

lol

mite be my dark coloured r32.

ye thats it, just dont line him up. :blink:

I was actually referring to what he got defected for, normally they pick those obvious ones so you have to get a full rwc anyway, he sort of got off light but if this cop knows his stuff it might not be as easy as he thinks, clever move by the cop as well, this way he has to take it back to a cop that knows what he is looking for as opposed to some nufty vic roads worked who will just check what is on the bit of paper.

What about the mods made them illegal? On p's or just not done with EPA in mind etc? I've always wondered this. If p's are gone. N u enclose your pod n do everything proper. They've got nothing to get u on. Or am I mistaken? Sumone fill me in. LOL.

I believe enclosing the pod does not matter here in vic, you have to run a factory air box if you have a fmic.

Looking at that car though, im guessing he has an atmo bov, pod + intercooler, adjustable boost controller (not allowed to have that at all), probably a full 3.5" very loud exhaust, too low, non padded steering wheel, no charcoal canister and a host of other things.

tmu cops have always bragged that they can defect a car the minute you drive it out of a show room so if they really want to do you (having no water in your washer bottle will get you a defect) they will find some little thing.

I was actually referring to what he got defected for, normally they pick those obvious ones so you have to get a full rwc anyway, he sort of got off light but if this cop knows his stuff it might not be as easy as he thinks, clever move by the cop as well, this way he has to take it back to a cop that knows what he is looking for as opposed to some nufty vic roads worked who will just check what is on the bit of paper.

I believe enclosing the pod does not matter here in vic, you have to run a factory air box if you have a fmic.

Looking at that car though, im guessing he has an atmo bov, pod + intercooler, adjustable boost controller (not allowed to have that at all), probably a full 3.5" very loud exhaust, too low, non padded steering wheel, no charcoal canister and a host of other things.

tmu cops have always bragged that they can defect a car the minute you drive it out of a show room so if they really want to do you (having no water in your washer bottle will get you a defect) they will find some little thing.

Wow. After reading that list of mods etc. Now I understand. Lol. U can still get some serious power if you use your head a bit though. Internals, ecu ( no hand controller) boost controller in ecu or get stealth looking one, high flow exhaust doesn't have to rattle windows.

However, who said you had to sensible wen if comes to nodding. I think tgats half the fun. To a point...

spotted a silver R34 on bourke st last night in the city, i think it was a GTR, but not sure, coz i was half way to passing out on the party bus :blink:

Was likely me. Yay finally spotted :blink:

Today saw

1000: White R33 GTS-T number plate [NAIS], shopping list stickers and exhaust on Montague St, City next to a white 911 carrera. 1 white guy in sunnies in the line.

1100: Yellow R34 GT-T Latrobe St. 2 ethnic guys.

1215: White R34 GT-T Bourke St. Had side skirts probably bomex?

spotted a stagea on springvale rd today with sau stickers

spotted a red 32gtr on bergins rd/wellington rd going into the stamford =]

also spotted a grey 32 gtst at inetrsection of burwood highway/springvale rd

spotted LEANBAC i think at knox ozone parked there

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...