Jump to content
SAU Community

Recommended Posts

Yea, flamin mongrel is quick. hehe

As for the car, senior officer gave him one month to take off all the mods and bring the car back to willy cop shop for an inspection. He didnt want to give him one week as it woukld be almost impossible to fix up in 5 days. Poor flamin mongrel haha, maybe when its stock il be able to give him a better run :blink: I was tripping out, this coppa new these cars inside out. lol

mustve been a nice cop to pretty much "let him off" in the way of no defect/epa and just make him come back to the cop shop and show him the car again.

still a hassle though taking everything off and making it standard.

Yea, flamin mongrel is quick. hehe

As for the car, senior officer gave him one month to take off all the mods and bring the car back to willy cop shop for an inspection. He didnt want to give him one week as it woukld be almost impossible to fix up in 5 days. Poor flamin mongrel haha, maybe when its stock il be able to give him a better run :blink: I was tripping out, this coppa new these cars inside out. lol

What about the mods made them illegal? On p's or just not done with EPA in mind etc? I've always wondered this. If p's are gone. N u enclose your pod n do everything proper. They've got nothing to get u on. Or am I mistaken? Sumone fill me in. LOL.

last night saw a white r34gt at fountain gate driving around near magid drive and also a dark colour r32 with sau stickers at fountain gate maccas. gave it a little bit as they were leaving the car park lol.

lol

mite be my dark coloured r32.

ye thats it, just dont line him up. :blink:

I was actually referring to what he got defected for, normally they pick those obvious ones so you have to get a full rwc anyway, he sort of got off light but if this cop knows his stuff it might not be as easy as he thinks, clever move by the cop as well, this way he has to take it back to a cop that knows what he is looking for as opposed to some nufty vic roads worked who will just check what is on the bit of paper.

What about the mods made them illegal? On p's or just not done with EPA in mind etc? I've always wondered this. If p's are gone. N u enclose your pod n do everything proper. They've got nothing to get u on. Or am I mistaken? Sumone fill me in. LOL.

I believe enclosing the pod does not matter here in vic, you have to run a factory air box if you have a fmic.

Looking at that car though, im guessing he has an atmo bov, pod + intercooler, adjustable boost controller (not allowed to have that at all), probably a full 3.5" very loud exhaust, too low, non padded steering wheel, no charcoal canister and a host of other things.

tmu cops have always bragged that they can defect a car the minute you drive it out of a show room so if they really want to do you (having no water in your washer bottle will get you a defect) they will find some little thing.

I was actually referring to what he got defected for, normally they pick those obvious ones so you have to get a full rwc anyway, he sort of got off light but if this cop knows his stuff it might not be as easy as he thinks, clever move by the cop as well, this way he has to take it back to a cop that knows what he is looking for as opposed to some nufty vic roads worked who will just check what is on the bit of paper.

I believe enclosing the pod does not matter here in vic, you have to run a factory air box if you have a fmic.

Looking at that car though, im guessing he has an atmo bov, pod + intercooler, adjustable boost controller (not allowed to have that at all), probably a full 3.5" very loud exhaust, too low, non padded steering wheel, no charcoal canister and a host of other things.

tmu cops have always bragged that they can defect a car the minute you drive it out of a show room so if they really want to do you (having no water in your washer bottle will get you a defect) they will find some little thing.

Wow. After reading that list of mods etc. Now I understand. Lol. U can still get some serious power if you use your head a bit though. Internals, ecu ( no hand controller) boost controller in ecu or get stealth looking one, high flow exhaust doesn't have to rattle windows.

However, who said you had to sensible wen if comes to nodding. I think tgats half the fun. To a point...

spotted a silver R34 on bourke st last night in the city, i think it was a GTR, but not sure, coz i was half way to passing out on the party bus :blink:

Was likely me. Yay finally spotted :blink:

Today saw

1000: White R33 GTS-T number plate [NAIS], shopping list stickers and exhaust on Montague St, City next to a white 911 carrera. 1 white guy in sunnies in the line.

1100: Yellow R34 GT-T Latrobe St. 2 ethnic guys.

1215: White R34 GT-T Bourke St. Had side skirts probably bomex?

spotted a stagea on springvale rd today with sau stickers

spotted a red 32gtr on bergins rd/wellington rd going into the stamford =]

also spotted a grey 32 gtst at inetrsection of burwood highway/springvale rd

spotted LEANBAC i think at knox ozone parked there

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...