Jump to content
SAU Community

Recommended Posts

Spotted a factory dark green R33 GTS-T Near my house on Princess Highway. Havn't seen many of them in that colour for ages, so was cool to see, didn't get plates, just noticed he was an SAU member, turning onto Fentree Gully Rd. Don't have my SAU stickers on anymore so if anyone sees me, give us a wave lol, ever since i took them off im like a leper, no one wants to talk anymore :S

Hopfully should get some new stickers again soon.

came up next to blue r34 GTR JSM-34. definatly had to give that fella a thumbs up as it was in mint condition and he drove it sensibly

i see this around now at glenny all the time. its really clean

Yellow R34 coupe with CF bonnet at Northland shopping center carpark (Wood St side) next to a 350Z about 5PM.

Number plates "G34RCE" (Geforce) or something to that effect - My short term memory sux....

drove past TOYGTR r32 gtr on stud road today saw him stare whilst stuck in traffic as i drove past lol and shortly after drove past charles.

yeah me and Charles saw that in dandy on Lonsdale street, outside those new Punt Hill apartments.

you would of just missed me Beza, i turned off at Chandler road later on.

also saw a blue r34 gtr with black bonnet , part of a wedding convoy. plates GTRR we all got a toot while waiting for a tow truck yesterday

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...