Jump to content
SAU Community

Recommended Posts

Spotted lots of skylines today whilst we were having our own mini-cruise towards Lake Mountain. Our group consisted of a 2x black r32, a blue r32 and a gunmetal grey r32, plus a white chaser. First spot was a silver r33 on the side of the princes fwy around hoppers crossing in the morning. Second, third and fourth spot were 2x gunmetal grey(I think) r32 gtr's and a black r32 gtst roughly 50kays away from the Lake Mountain Resort.

Spotted lots of skylines today whilst we were having our own mini-cruise towards Lake Mountain. Our group consisted of a 2x black r32, a blue r32 and a gunmetal grey r32, plus a white chaser. First spot was a silver r33 on the side of the princes fwy around hoppers crossing in the morning. Second, third and fourth spot were 2x gunmetal grey(I think) r32 gtr's and a black r32 gtst roughly 50kays away from the Lake Mountain Resort.

Yay Finally spotted, I'd be the 2x gun metal 32 gtr you guys saw :blink: once in healsville and once when you were coming up to lake mountain I was on the way down.

Saw a white R32 with CR KAI's turning right on to Commercial Rd off St Kilda Rd. I think you were waving at me, I waved back :P

That was me mate :), yes indeed I was waving at ya lol

My GF was wondering what i was doing.....(she's not a car person ha ha)

Very clean 32 you've got :blink:

cool, sorry i couldnt tell, just finished work and was tired as lol plus it was raining. nice car too very clean :banana:

Cheers mate yours nice as well !! It's good to see SAU people not trying to race each other on the road unlike other car I've come across. :thumbsup:

Edited by Panko
spotted sau member at vic roads dandenong driving 32, wearing red jumper i think, this was thursday

then friday night spotted 3 skylines all sau stickers driving down springvale rd.

LOL , that was me in the red jumper getting another unregistered vehicle permit haha! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...