Jump to content
SAU Community

Recommended Posts

Hey guys I’m having some trouble with my car (r33) at the moment. When coming on boost hard it pings! On the dyno putting the hammer down from 2000rpms it runs fine most times However. Putting the hammer down from 3000rpms and upwards, when it shoots straight on to boost its leaning out for a few seconds. As far as I know it has not always done this, As I’ve never heard it ping before and its always ran rich. What should I be checking out? The dyno operator thinks it’s the jap tuned ecu (re-mapped stock ecu). I think if that was the case it would have always had this problem! I have turned down the gain and boost on the boost controller (greddy pro fec b) and recently changed the o2 senor. I have just put in new spark plugs and oil. I’m thinking clogged fuel filter maybe? Where else should I be looking. I also cleaned the afm which had a fair bit of crap in it. but it didn't help out

Mods I have if this helps.

Exhaust turbo back 3 inch

Front mount Cooler 600x300

And high flow fuel pump

Stock turbo running stage 1 9psi and s2 12psi its ping’d on both these levels of boost. although top end boost is always the same as it drops to 9-10psi

Thanks

Russ

Link to comment
https://www.sau.com.au/forums/topic/211258-leaning-out-help/
Share on other sites

Faulty fuel pump?

Blockage in the fuel filter?

Injectors need cleaning?

Coils are arching?

Spark plugs gapped incorrectly?

AFM ?

When you say ping..you mean.starving of fuel..like a cut out...or a fart,kick and bang?

Is it fuel or ignition?

What is your revs and AFR reading when it pings?At this point what is your ignition timing?

More info required

no sorry never got it printed out.

The car does not fart, bang or kick or anything it would just all of a sudden make this kinda rattle/tapping noise under heavy load. I was hearing this noise on and off as i gassed it, so i did an oil change and had it put on the dyno.. on the dyno we got it leaning out from what a understand just a little say 13-13.4 a/f mix spike between 3-4000rpms just after or as it came on boost. it would start to richen up, say move from 15:1 just holding 3000rpms to 12:1 once the foot went down then back to 13.4:1 for a sec and drop right down to 10.5:1 af mix. now on the dyno i did not hear any strange noise the dyno operator said he heard it ping a few times just briefly. I was just watching the a/f mix. he then told me that when ever i'm driving around and giving it a bit it'll could be doing damage? so i'm like well how can i stop this. will i be able to hear if it leans out?

thanks guys

yeah I would guess a fuel pressure problem - put a gauge on it and make sure you are not short of flow up high. dying fuel pump, fuel pump wiring, blocked filter etc etc etc. some of the jap ecus are a bit leaner than we like but they should not be causing it to ping all the time

hmm could be a few things.

I'd also try a stock computer, just to see what happens.

Not saying its the most likely problem but i'm sure someone has one kicking about they would let you borrow and will cost you nothing to try.

also you say hiflow pump, what type? brand, specs etc? if you havent had it out i'd pull it out, check it out, check the wiring, earth it out to the body if you already havent, check the voltage its getting etc.

i doubt it would be the filters, but wouldnt hurt the check out the pickup, and replace the filter.

other than that, try new FPR.

I'd try to borrow someones AFM too, just put it on and see what happens. Doesnt cost anything to swap things over.

I have no idea on the pump. The stock one died not long after I got the car and I had it replaced though warranty. The mechanic just said he had a high flow one lying around so he put that in. I was told it was band new. I’ll see if I can get a mate around with a multi meter and fuel pressure gauge. What should the pressure be?

I think it was around 42psi last time I checked at idol.

Apart from the lean patch coming on boost the a/f mix was the same as all my other dyno runs, would that count out the afm?

Also what do you think would be the best way to check for internal damage? Leak down test?

Thanks guys

if its pinging at 3000-4000rpm, you might be a bit lucky and escape any major damage.. few scorch marks maybe... i wouldn't be pushing your luck tho. I believe 40psi is fine on the fuel pressure, so assuming you have that, most likely culprit is the tune on the ECU... either too much timing or too lean a tune in that rev range... Go aftermarket and get a tuner to do a proper tune or get a stock ecu to replace it.

yes it could be the AFM reporting incorrect (too low) air flow causing the ECU to think their is less air than there is and consequently injecting less fuel, causing detonation. again, borrow one to test.

What sort of fuel are you using ??

bp 98 octane maybe I've just had a bad batch in the last few tanks.

but if it was the afm then wouldnt it be lean all the way? or up and down? I don't think it is the ecu cause as far as I know Its never run lean untill now! unless its always had a lean spot hit R&R and thats why its always run so rich up top. I'll check out the fuel filter and pump voltage first a guess.

Sounds like fuel pressure to me.

~42lbs base, (engine not running / no vacuum in the plenum) so u should have much less at idle.

Try and get a gauge on it for the dyno session; even feed the voltage from a o.pres sender into the dyno, so its plotted along with the rest.

Are you sure your ignition system isn't weak (for all the usual reasons) and your mis-firing?

A mates S14 was breaking down at peak tourqe (~3600 rpm) which caused mis-fires, and pinging. The lean spikes on the readout are from unburnt fuel past the 5 wire. SplitFires fixed that issue.

Edited by GeeTR

My car was running like crap. Took it to a tuner, threw it on a dyno, attached a fuel pressure gauge, found it was running lean.

Was told to change the pump. Did that, and did the filter too. Helped but was still running sluggish esp. near redline. Needed my timing adjusted and serviced my AFM. Squeezed like an extra 10rwkw just from that and gave me much smoother power curve.

That's my story :)

Edited by R338OY
I have no idea on the pump. The stock one died not long after I got the car and I had it replaced though warranty. The mechanic just said he had a high flow one lying around so he put that in. I was told it was band new. I’ll see if I can get a mate around with a multi meter and fuel pressure gauge. What should the pressure be?

I think it was around 42psi last time I checked at idol.

Apart from the lean patch coming on boost the a/f mix was the same as all my other dyno runs, would that count out the afm?

Also what do you think would be the best way to check for internal damage? Leak down test?

Thanks guys

Just because you were told that it was replaced for a new one, doesnt mean it happened. Sounds a bit untrustworthy but I myself have been bitten before. Could be worth a look. Just a thought.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...