Jump to content
SAU Community

Recommended Posts

Well, around $1200. http://justjap.com/store/product.php?productid=19203&cat=&page=1

There was another place doing them slightly cheaper, but I can't remember who.

No worries at all re; loan, perfectly understandable.

I don't think R33 shocks would fit at all; they're a fairly long shock with a coilover spring, whereas the Stagea uses a fairly short shock and separate spring.

  • 1 year later...

Hi all,


Apologies for bringing up an old thread. I've recently purchased r33 slotted rotors and r33 gts-t calipers to fit to the ARX. As far as I've read, it should be pretty much a straight swap with minimal modding required for the fronts. Hopefully these items will be delivered by the weekend so I can put them on, but I just wanted to check prior to fitting, what I should be expecting?

-The calipers have a restrictor in them which can be removed by screwing in a self tapper and pulling it out? This is so the m35 brake line which is 2mm larger will fit, no worries. Is this correct?

-I also read somewhere I may have to machine off a few mm off the hub? Or was this only for GTR32 rotors to fit?

-I was planning on putting the rears on as well, but is the mount different for the calipers? Can someone please confirm this? :)


Currently I have a set of BBS rims, so there should be plenty of clearance. If not, I have 30mm spacers I can put on for back up.

Cheers in advance!

33 front callipers will fit but the bolts are M12 and the stock ones are M14, so you will need a tube spacer which I can make if you need it. You will also need to remove the restrictor so the banjo will go all the way in. There is a good chance you will need to grind a little off the bottom of the hub or it will grind when you go around corners.

The rears won't fit as the spacing is completely different.

Thanks for the info, Scott. Damn, so there's no chance on hooking up the rear r33 rotors & brakes then. Anyone wanna buy some brakes off me? BEST PRICE! :)

OK so what are the other options for rears? DBA Slotted Xtrail rotors & HPX pads? I won't be tracking the car or anything like that.

Also, one more question.. Can anyone confirm if r34 gtt rotor & caliper will fit? I thought I read that somewhere here a while back, but can't find it now. Just seeing what my options are as the brakes look puny - I feel I need to fill the space!

Also, one more question.. Can anyone confirm if r34 gtt rotor & caliper will fit? I thought I read that somewhere here a while back, but can't find it now. Just seeing what my options are as the brakes look puny - I feel I need to fill the space!

They fit perfectly, but you will have to trim away a portion of the dust shield, as it contacts the disc rotor.

They make a great upgrade over standard, they are what the car should have been fitted with from the factory.

They fit perfectly, but you will have to trim away a portion of the dust shield, as it contacts the disc rotor.

They make a great upgrade over standard, they are what the car should have been fitted with from the factory.

Or the other option is to use a 3mm slip-on spacers put between the hub and disc. Also use the same thickness washer between the calipers and the carrier. No trimming or grinding and looks factory. That's what I did.

Thanks for the offer, Benny, but you're too late! Scotty has jumped in there first and I already have them en route to Sydney. Got a bucks on this weekend, but will try and get around to installing the brakes this weekend if not too hung over :)

  • 2 months later...

Finally found some time to put my brakes on. Big thanks to Scotty for fabricating the spacers - they worked a treat :thumbsup: Removed the restrictor as directed, but the line wouldn't fit oddly.. so still had to remove a few mm. Strangely enough, removed the restrictor on the other side - and it went straight in with no problems. So I figure I must be retarded or something. All in all, still have to bed the pads in - but big success.

I apologise in advance for the vulgarity of the red. I wanted to spray them a dark bronze instead, might do it later when the red grows old.

Shiny new!

20131109_161109.jpg

Excuse the touch up over spray. It'll get dirty soon enough.
20131109_183840.jpg

  • Like 1
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...