Jump to content
SAU Community

Recommended Posts

Well, around $1200. http://justjap.com/store/product.php?productid=19203&cat=&page=1

There was another place doing them slightly cheaper, but I can't remember who.

No worries at all re; loan, perfectly understandable.

I don't think R33 shocks would fit at all; they're a fairly long shock with a coilover spring, whereas the Stagea uses a fairly short shock and separate spring.

  • 1 year later...

Hi all,


Apologies for bringing up an old thread. I've recently purchased r33 slotted rotors and r33 gts-t calipers to fit to the ARX. As far as I've read, it should be pretty much a straight swap with minimal modding required for the fronts. Hopefully these items will be delivered by the weekend so I can put them on, but I just wanted to check prior to fitting, what I should be expecting?

-The calipers have a restrictor in them which can be removed by screwing in a self tapper and pulling it out? This is so the m35 brake line which is 2mm larger will fit, no worries. Is this correct?

-I also read somewhere I may have to machine off a few mm off the hub? Or was this only for GTR32 rotors to fit?

-I was planning on putting the rears on as well, but is the mount different for the calipers? Can someone please confirm this? :)


Currently I have a set of BBS rims, so there should be plenty of clearance. If not, I have 30mm spacers I can put on for back up.

Cheers in advance!

33 front callipers will fit but the bolts are M12 and the stock ones are M14, so you will need a tube spacer which I can make if you need it. You will also need to remove the restrictor so the banjo will go all the way in. There is a good chance you will need to grind a little off the bottom of the hub or it will grind when you go around corners.

The rears won't fit as the spacing is completely different.

Thanks for the info, Scott. Damn, so there's no chance on hooking up the rear r33 rotors & brakes then. Anyone wanna buy some brakes off me? BEST PRICE! :)

OK so what are the other options for rears? DBA Slotted Xtrail rotors & HPX pads? I won't be tracking the car or anything like that.

Also, one more question.. Can anyone confirm if r34 gtt rotor & caliper will fit? I thought I read that somewhere here a while back, but can't find it now. Just seeing what my options are as the brakes look puny - I feel I need to fill the space!

Also, one more question.. Can anyone confirm if r34 gtt rotor & caliper will fit? I thought I read that somewhere here a while back, but can't find it now. Just seeing what my options are as the brakes look puny - I feel I need to fill the space!

They fit perfectly, but you will have to trim away a portion of the dust shield, as it contacts the disc rotor.

They make a great upgrade over standard, they are what the car should have been fitted with from the factory.

They fit perfectly, but you will have to trim away a portion of the dust shield, as it contacts the disc rotor.

They make a great upgrade over standard, they are what the car should have been fitted with from the factory.

Or the other option is to use a 3mm slip-on spacers put between the hub and disc. Also use the same thickness washer between the calipers and the carrier. No trimming or grinding and looks factory. That's what I did.

Thanks for the offer, Benny, but you're too late! Scotty has jumped in there first and I already have them en route to Sydney. Got a bucks on this weekend, but will try and get around to installing the brakes this weekend if not too hung over :)

  • 2 months later...

Finally found some time to put my brakes on. Big thanks to Scotty for fabricating the spacers - they worked a treat :thumbsup: Removed the restrictor as directed, but the line wouldn't fit oddly.. so still had to remove a few mm. Strangely enough, removed the restrictor on the other side - and it went straight in with no problems. So I figure I must be retarded or something. All in all, still have to bed the pads in - but big success.

I apologise in advance for the vulgarity of the red. I wanted to spray them a dark bronze instead, might do it later when the red grows old.

Shiny new!

20131109_161109.jpg

Excuse the touch up over spray. It'll get dirty soon enough.
20131109_183840.jpg

  • Like 1
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...