Jump to content
SAU Community

Recommended Posts

hey guys,

my dad just got a 03 xr6t and he wants to "soup" it up !! haha

he wants to know what he should do to it, i have no idea about fords or their engine, anyone know much? what is it capable of stock, what mods first, etc etc

cheers !

Edited by sillylankan
Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/
Share on other sites

Flash tuner/edit

Turbo back exhaust

Injectors

Fuel pump

Upgrade the cooler

Upgrade the valve springs

It will make like 300rwkw + after the tune and above mods

Take it to NIZPRO or HPF and they will fk it right up for you

Even with just a generic flash tune/edit which is about $900 I think these days, will get it to about 248rwkw with everything dead stock

Then get Kewish to build you a strong gear box and you will have a tuff streeter doing like 11 - 12 second passes

oh and just for kicks upgrade to like a NIZPRO plenum and externally gate the standard manifold with a TURBOSMART progate

All the best :)

Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/#findComment-3779803
Share on other sites

if you can get around the boost protection, boost it up a lil. or go all the way and get a flash tune for it.

garret 3540, decent exhaust, fmic, and bosch 040 fuel pump from standard.. so they have some decent potential.

check out www.fordxr6turbo.com as it's dedicated to the xr6t.

Edited by dmr
Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/#findComment-3779826
Share on other sites

Nizpro or APS are 2 names that spring to mind from my Ford days...that was when the XR6T's were still fairly new and APS/Nizpro were doing CRAZY things with them (1000HP engine from Nizpro) so I'm sure there's plenty more tuners for them now...

Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/#findComment-3779943
Share on other sites

dynomiye performance, those guys knows there shit..

his turbo ute, look under the bonnet and its dead stock, nothing touched, then when out for a cruze in it

no word of a lie, 100kms he put the power down and smoked calder freeway up like nothing..

tune zorst injectors, were the only mods..

Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/#findComment-3780033
Share on other sites

hey guys,

my dad just got a 03 xr6t and he wants to "soup" it up !! haha

he wants to know what he should do to it, i have no idea about fords or their engine, anyone know much? what is it capable of stock, what mods first, etc etc

cheers !

Yeah, but what kind of soup?

Chicken or Pumpkin?

Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/#findComment-3780890
Share on other sites

tune and an exhaust and these things make heaps of power! they come with a garret gt35 stock which can make huge power and the 4.0l has no problem winding it up. :) Ive seen multiple xr6t's on RE customs dyno pumping out over 350rw.

Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/#findComment-3782738
Share on other sites

As far as FORD and Holdens go my vote is APS or even DYNOMOTIVE..I know the owners of Dynomotive personally and they know their shit when it comes to Ford's and Holdens (see Tim who works there's EF Falcon XR6T).. APS are good too.. I know for a fact the owner of that buys one of every high perfomance car that comes in order and use as a prototype for mods (within reason of course).. Ive seen a xr6t, a wrx sti, a lancer evo 6 and 7, a dodge viper, couple of holden utes and a few skylines in the owners garage (he owns a massive two storey joint and the first story is just a garage lol)

I also know Nizpro do good work they tuned my dads mates xr6t it was like 390kw atw or some crazy shit.. with full exhaust, fmic, bigger injectors, some sort of ecu (forget the name), bigger fuel pump and the whole rear end rebuilt so it had decent traction lol..i remember my old man telling me the car was a family car and had a hi-low boost setting that was passworded on it so when the guys wife drove it she couldnt hoon lol...

Link to comment
https://www.sau.com.au/forums/topic/214067-xr6-turbo/#findComment-3789492
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...