Jump to content
SAU Community

Recommended Posts

  • Replies 172
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yeah I'd like to thank Archie for reminding me I'm still alive. There's nothing quite like going through the kink backwards at 150km/hr to point it out to ones self.

You're most welcome :D

You should of went home and hugged your family and told them how much they mean to you and returned that library book you borrowed in 1985.

I actually enjoyed myself and was spewing i didn't get a crack at a better time when the sun came out later on.

The first practice session of the day when the track was at its worst i tootled around and did a PB of 1.23.2.

On my previous (and first) outing there with good track conditions I managed a 1.23.5 and this was with a single turbo setup.

Just goes to show how much better the current twin set up is :D

I was glad though that there were no casualties due to my oil spill. I had no idea i was leaking oil as i drove around and exited the track.

Juz picked it up and mentioned it in the pits and we thought we better let clerk of course etc know asap but i imagine by that time a few would have already gone over it.

Jarrod that's no excuse! I wanted a pic damn it. If you're in the in-field than that means you're hardcore and can take a hit.....even if it is from a car!!

ROFL @ Adz

I almost cried seeing the lovely silver 32 with damage on it:(

?? :teehee: ??

Now I can finally have a race track time in my signiture!

Tim. You did well to hold this one! Over the ripple strip!

SJD_1237.jpg

well despite the usaul issues i had an absolute ball. killed my pb by 4 seconds and the other datto boys also whipped out pb's. Good work russman, has the bug bitten now? haha

i seem to have issues with the nuts that hold my turbo on the manifold constantly coming loose. its a top mount and the nuts wind their way up! so i end up spending most of my day either driving or fixing and don't get to wach too many others.

i'm glad the pre 89 class is starting to get quicker too, look out skylines haha

yeah we got through scrutineers ok :teehee:

but it was short lived for me, fried my rear pads to the metal after the 2nd session and wasnt making much boost all day, (found out when i got home the wastegate actuator had un bolted its self,) but it makes me feel even happier with my 1:26.7 knowing i had no boost.

well done to leigh, posted good times and drove home. (no trailer)

and crossy back in the corona, lasting all day.

cant wait till nex time.

.... but it makes me feel even happier with my 1:26.7 knowing i had no boost.

Top work on the great time. Yeh, its great to see that with a wider cross section of cars and driverr everybody is still going scary quick. Back in 2004/2005 that would have been quick enough to get you into the top few cars inc all the GTRs.

No doubt with time, practice and development there is more fin to be had. LOL, i cant imagine punting a 1600 around a place like Sandown with the slow corners. SO much steering effort must be required!

Some data from the day - unfortunately for me, my fastest session (session 3) hasn't logged properly so no comparison base for next time - I'll be flying blind! :P

Best theoretical time with all fastest logged sectors was 1.20.6 - shows how inconsistent I was on the day with a fastest of 1.21.8, blah... :)

post-21259-1212414136_thumb.jpg

Looking at lat and long G ratings the track wasn't as bad as it felt as I have never recorded more than 1.5G's under brakes (1.41 G's last year, however my pads were nearly shagged on Sunday and should have changed them) although the corner loads were down at bit, would normally see 1.35 - 1.4 G

Interesting stuff Andrew. I notice your top speed was about 9km/hr down on my recorded top speed (235km/hr). But my top speed was about 10km/hr down on where it usually is which makes sense based upon where my shift points on the back straight were on Sunday.

But the thing I'm finding most interesting is you saying the braking forces were up from the past. I know I was having to brake into turn 1 at around the 200m mark where normally I brake from around the 170 mark so I was finding braking distances were heaps longer than usual (turn 2 was another I regularly struggled to pull up in time for all day long).

Interesting stuff Andrew. I notice your top speed was about 9km/hr down on my recorded top speed (235km/hr). But my top speed was about 10km/hr down on where it usually is which makes sense based upon where my shift points on the back straight were on Sunday.

But the thing I'm finding most interesting is you saying the braking forces were up from the past. I know I was having to brake into turn 1 at around the 200m mark where normally I brake from around the 170 mark so I was finding braking distances were heaps longer than usual (turn 2 was another I regularly struggled to pull up in time for all day long).

Sorry, probably gave the wrong impression. My braking force was down on last year, just have a look at the minimum longitudinal G's - they are 1.34 for Sunday and I was getting over 1.41 G last year. I had a scan back to some old data and I have never got 1.5G's under brakes on any track is what I should have said, at least in the data that I have saved.

I agree with turn 2, a few times I thought I was going into the ditch, I just turned right and hoped for the best.

With the shitty corner grip I was getting, I was getting lousy exit speeds, no doubt giving me a lower top speed. I was not pushing the car after the spin as I wanted to drive home. :thumbsup:

So what you are effectively saying is that compared to your last visit to Sandown your braking longitudinal G's are down and your cornering lateral G's are also down - but yet you managed to set a new PB for Sandown! That's a fair effort :thumbsup:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...