Jump to content
SAU Community

Recommended Posts

What: Dyno day on AWD dyno dynamics

Where: TM Autosports Unit 3/99 Gavenlock Road & Boswell Close Tuggerah

When: Saturday 19th July

Cost: $50 for 3 runs with printout

Time: from 8am

Prizes: highest na, 4cyl, 6cyl, 8cyl

Extra: will have a bbq and drinks put on at a small cost

We are aiming at 20+ cars, but can go up to 40. So if your keen for a run you will need to come along early.

Link to comment
https://www.sau.com.au/forums/topic/219507-central-coast-dyno-day-19th-july/
Share on other sites

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

I work till 12 on saturday's, if i rock up around 12:15 will is still get my 3 run's?

If you know anyone that is goin and can put your name and money down in the morning or if you know you are definately goin i can put your details in. pm me with your details if this is the case.

  • 2 weeks later...



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...