Jump to content
SAU Community

Haltech R35 Gt-r Dyno & Drag Results Thread


Recommended Posts

  sh@un said:
11.1 and 126mph from a car that weighs 1740kg, and has had no mechanical changes, is nothing short of staggering.

all hail the new king of performance cars

Maybe the new ecu is a cuppla hundred kg lighter than the factory jobbie. :banana::teehee:

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

fantastic result for first time out!!

i remember being happy when my evo ran 12.4 with autronic, 3 inch turbo back exhaust, aps cold air induction, etc

boost incease and tune & 11.1 @ 124 excellent! 10's are coming very soon

So what happens when they make some more adjustments to the tuning and on a good warm day it runs a 10.9sec and they are forced to put a cage in it, will they?

Because it can't be more than a month away before it does run a 10sec pass but I can't see them wanting to strip out a perfect good R35 just to run another 10sec pass.

Its interesting that it had a higher trap speed on the third run, without the correct launch control (which as far as I understand is just the equivalent of dumping the clutch in a manual). I wonder what happened there...

very impressive especially considering that it's running street tyres. imagine what gains there would be with some semi slicks or even better some proper drag radials. :)

I think it might be a bit of a challenge fitting the 255/50/16 radials over those gi-normous brakes. :)

But running a 10 with basic mods on factory rubber and stock everything else including exhaust is phenominal. Just shows you how well this car has been designed and engineered.

Sign me up...

  ras1983 said:
though I don't know if an owner would want to modify a street driven one it while its still under factory warranty if it will void the warranty... what do you guys think?

Depends on how cashed up they are?

If the purchase price was the absolute max they could afford, then I guess they wouldn't.

However, if $$$ aren't a major factor then anything goes...

Yeah definately with that mile on the third run it would have been a 10 second pass!, our first 10 pass was 10.8@ 129 mph

so the haltech gtr with a good launch is already capable of 10's. excellent result.

Edited by giant

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 馃
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
  • Create New...