Jump to content
SAU Community

Recommended Posts

The government would probably charge us for some sort of entry fee because they had to close down a road. :down:

It'd be worth it lol. Shame our government wouldn't do anything similar anyway.

No, it went from a 700cc to a 1.2ltr. Don't knock it, I used to drive an 800cc which wasn't too bad. If I dropped a 1.2ltr in it I reckon it would have flown! Seriously.

It's a good idea, too bad our government would NEVER consider it, something about promoting street racing...

No, it went from a 700cc to a 1.2ltr. Don't knock it, I used to drive an 800cc which wasn't too bad. If I dropped a 1.2ltr in it I reckon it would have flown! Seriously.

It's a good idea, too bad our government would NEVER consider it, something about promoting street racing...

hahah I know what you mean. I've currently got a 1.3 carby in my car, my mate's got the same car, but with the 1.6ltr version and I reckon his car's fast as! hahaha

European countries are so progressive and open-minded, not just about speed (eg., autobahns) but life in general. Usually if you give the public more freedom, no, anarchy will NOT ensue. The general public are surprisingly good self-regulators, as they will not let one person's freedom encroach upon other ones.

That's pretty funny, by the line up of cars they showed ect.. I can't see it (street racing) being huge problem for them...I was waiting for a Lada v Donkey and Cart to line up.

$5 on the donkey :D

Might boost tourism for them.

I went to dozens of legal street drags in NZ... pretty sure you had to pay to enter but it wasnt much... was always fun to go watch as a kid with all the hot rods and moded jappers screaming down the qtr mile in the middle of a factory area.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The frontend wouldn't go low enough because the coilover was max low and the upper control arm would collapse into itself and potentially bottom out in the strut tower. I made a brace and cut off the kingpin and then moved the upright down 1.25" and welded. i still have to finish but this gives an idea. Now I can have a normal 3.25" of shock travel and things aren't binding. I'm also dropping the lower arm and tie rod 1.25".
    • Motor and body mockup. Wheel fitment and ride height not set. Last pic shows front ride height after modifying the front uprights to make a 1.25" drop spindle.
    • Here's Logans Silvia with R32 Drivetrain, mine will be slightly lower (more angle). He was constantly blowing the RH axles at around 16deg. I want to avoid this.    
    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
×
×
  • Create New...