Jump to content
SAU Community

Recommended Posts

Your a funny guy,,,November,,,which bloody year.

Let me get my head around Raceworx schedule. We have to build Duncans engine,,,finish off his front end,,,play with his rear end and whatever else has to be done. This will all be done in the heat of summer. I was called a bludger on Sunday but did anybody you look at the days temps,,,KISS IT BOSS,,,THE STAFF WENT ON STRIKE. It was bloody hot and it only gets worse from here on in. In the mean time we have to get a gassed up GTR going,,,play more with the nugget and maybe even start on Marky's targa car.

Ah life sweet and easy sometimes.

At least my cars still going,,,which will,,,by the way need Marky to help me put headlights in very very soon.

Oh I did mention I'm getting too old for this shit,,,I think I have many times.

Love as always

Neil.

Gee wiz I hope they pay well. :)

Well if you guys need any help and by help I mean a spanner passer and beer holder I might come to see this beast being assembled.

Go the crack crappy Chinese manifolds, I have had one on my car for nearly 2 years now and it is still going strong, I think Dave (TO4 GTR) uses one too. Welcome to the club.

have to pay the bills at the end of the day, i know where your coming from.

No we don't get to put anymore shiny bits on the bloody nugget. We get to push the nugget out of the way and get either your GTR worked on or Marks roady worked or even both.

The foreman has spoken.

hey guys, i have a brand new r32 fibreglass boot lid for sale as it arrived to late for me to use as car was painted already. it weighs 8kg, is excellent quality, retains standard hinges and release . is strong as it has all the ribbing. i wish i could have used it but too bad. Cost me $360. be happy to get $300 back for it.

sorry to whore your thread duncan, but atleast i didnt put boobie pics in it lol.

indeed you do know. will be good to get the windows in too.

I'm working through the wiring plan at the moment, this stuff is damn complex. nissan making me think backwards by putting the switch on the earth side of most relay coils not the + side. Or even putting the switch or relay on the earth side of devices altogether like the fuel pump instead of + side.

I kind of get it but its like trying to think backwards.

Hey Brad what is "vehicle speed sensor" pin 53? Its marked as being needed up I don't think it is any more? Also what is the "check connector" shown at pin 7? I know the "check connector" at pin 1 is the timing light loop, what is the other one? just dash signal?

And why the hell do so many earths go all the way back to the ecu instead of the chassis? I have 10 pins (34, 26, 50, 60, 30, 107, 108, 116, 20, 10) all marked as earths?

hey guys, i have a brand new r32 fibreglass boot lid for sale as it arrived to late for me to use as car was painted already. it weighs 8kg, is excellent quality, retains standard hinges and release . is strong as it has all the ribbing. i wish i could have used it but too bad. Cost me $360. be happy to get $300 back for it.

sorry to whore your thread duncan, but atleast i didnt put boobie pics in it lol.

hahaha um yes. i could point out i didn't post any pics but i dont think that makes it right :)

I was looking everywhere for a fibreglass boot for this car and could not find them for under about 350 (same as you i guess). So instead we have put together a custom aluminium boot lid which looks like it will come up pretty nice, and it is outrageously light, we really need to weight it but only a couple of kg.

But anyone else building a club car should snap it up.....the standard boot is so damn heavy you would not beleive.

What are you doing instead?

i ordered it a month before the car got painted, but unfortunately there was a delay and i didnt recieve it till after the car was already done, so have brand new lid. i might wait and see how the car goes for weight and paint it later if necessary. im using standard one atm.

hahaha um yes. i could point out i didn't post any pics but i dont think that makes it right :D

I was looking everywhere for a fibreglass boot for this car and could not find them for under about 350 (same as you i guess). So instead we have put together a custom aluminium boot lid which looks like it will come up pretty nice, and it is outrageously light, we really need to weight it but only a couple of kg.

But anyone else building a club car should snap it up.....the standard boot is so damn heavy you would not beleive.

What are you doing instead?

hey mark and duncan is that an Accusump i spot in those pics of the engine bay? if it is have u used one before and are they a genuine alternative to a drysump for saving our engines on the track? anyone else have any input on how good they are and whether they are worth buying for track car? i honestly dont want to go dry sump ive spent enough as it is so no suggestions to go that way.

sorry for the mini hijack too and the car is lookin like its coming together slowly but nicely :D

also ill be doing the wiring loom soon myself so any info or tips on doing a new loom please send them my way or post them up if u dont mind. I think 90% of it will be ok as im starting from scratch its the attessa stuff and deleting the abs part im not 100% sure on. :)

Edited by unique1
No we don't get to put anymore shiny bits on the bloody nugget. We get to push the nugget out of the way and get either your GTR worked on or Marks roady worked or even both.

The foreman has spoken.

Yes Duncan I thought something like that may have been the case, cross your fingers they last a few meetings.

Re Accusump, I run one on my speed boat Zed, and motor has not had a prob and has not been out of the engien bay for aobut 3 .5 years.. Sam Markov runs one with over 4004wkw for years in his race car and no issues either. Dry sump is obviously better but cheap go between. Funny GTR owners think zeds are unreliable. My zed and I know different. Beer Baron, waiting............

John, turbos are t03/04 fittings so needed bigger flanges. Also because the turbos are bigger in general and there is much more space than would be in a normal engine bay, we've moved them around for ease of piping the intake and exhaust. The rear one sits out a fair bit from the front to give it clear access for the intake and to offset the two exhaust outlets. We won't be able to take the motor out by dropping the cradle and lifting the car as the rear sits over the rail, but that's not a big deal.

I thought about re-flanging a set of custom dumps, there are a few sets lying around at home, but it was just easier to work with the china stuff than the cast stuff. Besides, we had to mate chinese turbos with chinese flangte :D

Yes Duncan I thought something like that may have been the case, cross your fingers they last a few meetings.

Re Accusump, I run one on my speed boat Zed, and motor has not had a prob and has not been out of the engien bay for aobut 3 .5 years.. Sam Markov runs one with over 4004wkw for years in his race car and no issues either. Dry sump is obviously better but cheap go between. Funny GTR owners think zeds are unreliable. My zed and I know different. Beer Baron, waiting............

your car is only relibable because the accelerator has never made contact with the floor board...let me in there and we'll see how it goes, I reckon we get past about 7,000rpm and conrod shoots out through your fancy carbon bonnet.

hehe, 4004 kw is a good effort from sam though... :D

John, turbos are t03/04 fittings so needed bigger flanges. Also because the turbos are bigger in general and there is much more space than would be in a normal engine bay, we've moved them around for ease of piping the intake and exhaust. The rear one sits out a fair bit from the front to give it clear access for the intake and to offset the two exhaust outlets. We won't be able to take the motor out by dropping the cradle and lifting the car as the rear sits over the rail, but that's not a big deal.

I thought about re-flanging a set of custom dumps, there are a few sets lying around at home, but it was just easier to work with the china stuff than the cast stuff. Besides, we had to mate chinese turbos with chinese flangte :(

nothing wrong with a bit of chinese flange. I prefer the japanese flange myself but don't want to offend anyone... :D

No we don't get to put anymore shiny bits on the bloody nugget. We get to push the nugget out of the way and get either your GTR worked on or Marks roady worked or even both.

The foreman has spoken.

You are right, but it's just fun when you get to to point of bolting new things on and it's getting close to being driveable!

Duncan mark decided that the Speed input was needed for diagnosis latter on down the track.

I dont have the diagram infront of me atm but from memory pin 7 is the tacho signal correct??

The check connector coming from that is not needed.

Pin 1 should be the output to the ignitor for cylinder 1 and on the output side if the ignitor should be the timing light loop.

You are correct all those pins should be grounded and you'll find that the all join up inside the loom and ground to one point at the front of the plenum. Two points actually.

The ECU and other control modules always drop relays to ground once you get your head around the negative triggers its all simple stuff.

Same as the Attessa, its not hard just need to follow the wiring diagram. Like I said to Mark if you cross out each wire on the paper as you move/shorten/remove it that way your always left with a loom thats only got what you need and your always sure everything will work.

Im starting on the white car hopefully over the long weekend. Think ill take even more out of it this time.

i wonce did some extrude honing on a half chinese/half australian flange, excellent.

nothing wrong with a bit of chinese flange. I prefer the japanese flange myself but don't want to offend anyone... :)
Yes Duncan I thought something like that may have been the case, cross your fingers they last a few meetings.

you know, thats exactly how a feel about the motor, not the manifolds :P

Brad I looked into wire 53 further, it is the speed signal from the dash speedo to ecu....no point keeping that the cluster is goooone. so no speed input or loggin in the standard ecu or PFC. but we do have a speedo that will run off the abs senders. and #7 (tacho's) check connector is gone - just no idea where it goes in standard loom. but it looks ok atm. I will post the whole car wiring diagram for a laugh once it is finished.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...