Jump to content
SAU Community

Recommended Posts

yep a trip to nissan so they can look it up and progam a key to it.

I can't remember when I did that car but it *should* have gotten two immobiliser tags. if not tell me and I can arrange a spare one.

yeah there was 2 little plastic immobiliser tags.. i don't remember any numbers on them tho... they were removed when i had the new alarm put in.. i think i know where they are tho..

if i have them tags will i need to get this code from Japan that everyone's talking about??

im getting lost now? i thought the tags were metal with a code on them?? or are these plastic ones that were on my keys something different?

Edited by GeNOS
  • 4 weeks later...

I can now program the transponder keys for V35 Skylines. The immobilise PIN can (in most cases) be calculated from the BCM serial number which I can do as well.

It requires deprogramming all existing keys and programming them again one by one including the new one. The key needs to be cut and have the little transponder chip inside it's plastic cover.

I'm in Canberra if anyone needs a key programmed.

Tom

I can now program the transponder keys for V35 Skylines. The immobilise PIN can (in most cases) be calculated from the BCM serial number which I can do as well.

It requires deprogramming all existing keys and programming them again one by one including the new one. The key needs to be cut and have the little transponder chip inside it's plastic cover.

I'm in Canberra if anyone needs a key programmed.

Tom

You all dat?

  • 2 weeks later...

Hi guys, I hope its okay if I drag up this long running thread again.

I have a 2002 HV35 300GT sedan which if I'm reading the thread correctly does not have a transponder in the key correct? Good news if so.

Second question is my key has remote entry buttons on it. Is it possible to get a spare one which will also open my car remotely? The key looks like this:

nIpKO.jpg

MH7GB.jpg

Cheers,

Ross

Hi guys, I hope its okay if I drag up this long running thread again.

I have a 2002 HV35 300GT sedan which if I'm reading the thread correctly does not have a transponder in the key correct? Good news if so.

Second question is my key has remote entry buttons on it. Is it possible to get a spare one which will also open my car remotely? The key looks like this:

/Snip/

Cheers,

Ross

Hey,

I have a R34 here, same looking key as yours, was going to get a spare, asked Nissan and they quoted me $550 for the key, but he said I could buy it in separate parts if that helped LOL.

that is a patrol key.

I can get them fairly easily and they are not $550..

That's odd, probably a different key, I was quoted $550 for the whole key, the guy printed out a sheet with an exploded view on it with all the individual parts totaling $550.

So I just went with the normal blank key for $10.

GGKAREAR34EDA-CF--

R34

9807

QM1G

RB25DE

4SPD AUTO

in which case part number is:

H0564-C9920

that is the full assy.

last one I bought was $300.

Ohh, thanks for that, I still remember when I asked him to check the prices for me, he told me it would be expensive (I was expecting around $200), but got quite a shock when he told me it would be over half a grand for a key :laugh:

So would I give this:H0564-C9920 part number to Nissan to order or ??

I will try and make this key last as long as it can, but the last owner from Japan seemed to have pressed the buttons with his/her nails :dry:

:cheers:

Hey Guys,

I am after some assistance from anyone who can tell me where is the best place in Melbourne to get a spare Key.

I have Just been to Nissan Brighton who quoted $453 to get a blank key and then said $150 to reprogram.

This is obviously expensive but from reading this thread seems to be standard from Nissan and I have searched ebay, import monster etc but cant seem to find a spare second hand.

Only problem is they told me they can't guarantee that the Reprogram will work but will charge me the $150 regardless.

I am having my alarm system replaced also as I only have one remote and can't seem to find a replacement remote due to it being a Chinese Brand Alarm currently fitted. Will replacing the alarm cause any dramas with the factory key / immobilizer?

Any help would be greatly appreciated

Regards,

Noel.

Hi - I have just had a spare key supplied by a local locksmith for my V35 coupe. The key doesn't have the remote function but it has the transponder in it so I can enter the car (which turns off the immobiliser) and start the car. He also supplied a valet key.

I did not have a key code, he has a reader which produces a serial number which then can be programmed into the transponder key.

Total cost = $125.

However if you lose your one and only key and don't have a key code, you can expect to pay about $1300 for a replacement. At least that is what it costs for and X-Trail which uses a similar security set up and key codes.

A word of warning - don't hide your spare key under the car (especially in a magnetic box)as most thieves can find it in about 30 seconds with a mirror and LED light. And the magnetism will affect your transponder inside the key.

I'm located in regional SE Qld so most metro cities should have similarly equipped locksmiths getting around the place. So don't get ripped off.

Cheers - Neil

does anyone know someone local to brisbane (southside) that can do this??

i dont need any buttons on my key, just something to unlock and start car.

  • 9 months later...

Sorry for bringing up an old thread....

But can someone tell me whether a key that has been programmed for another car can be re-programmed?

I have an idea to use a key from a wrecked V35 and turn it into a fob as a spare.

Sorry for bringing up an old thread....

But can someone tell me whether a key that has been programmed for another car can be re-programmed?

I have an idea to use a key from a wrecked V35 and turn it into a fob as a spare.

why yes!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you not seen geospy.ai? It can now give GPS co ords to within a metre from a photo, even if it's a random photo you take inside. Supposedly at the moment only the government/law enforcement has access to that... Supposedly...
    • I've got the rear ones, they're certainly beefy. I need to take them to my driveshaft guru to check over, he's very fussy about the quality of components so I'll let you know if they are made of cheese by a blind man.   Are you in Australia? A mate just had a set of EN26 shafts made for his K20 Lotus by our fabricator which were quite cheap (compared to Driveshaft Shop) so if you can procure the CV's and draw what you need he'd make them for ~$800 for the pair.
    • Had I known the diff between R32 and R33 suspension I would have R33 suspension. That ship has sailed so I'm doing my best to replicate a drop spindle without spending $4k on a Billet one.
    • OEM suspension starts to bind as soon as the car gets away from stock height. I locked in the caster and camber before cutting off the kingpin. I then let the upright down in a natural (unbound) state before re-attaching it. Now it moves freely in bump and droop relative to the new ride height. My plan is to add GKTech arms before the car is finished so I can dial camber and caster further. It will be fine. This isn't rocket science. Caster looks good, camber is good, upper arm doesn't cause crazy gain and it is now closer to the stock angle and bump steer checks out. Send it.
    • Pay careful attention to the kinematics of that upper arm. The bloody things don't work properly even on a normal stock height R32. Nissan really screwed the pooch on that one. The fixes have included changing the hole locations on the bracket to change the angle of the inner pivot (which was fairly successful but usually makes it impossible to install or remove the arm without unbolting the bracket from the tower, which sucks) and various swivelling upper arm designs. ALL the swivelling upper arm designs that look like a capital I (with serifs) suck. All of them. Some of them are in fact terribly unsafe. Even the best one of them (the old UAS design) shat itself in short order on my car. The only upper arm that works as advertised and is pretty safe is the GKTech one. But it is high maintenance on a street car. I'm guessing that a 600HP car as (stupidly, IMO) low as you are going is not going to be a regular driver. So the maintenance issues on suspension parts are probably not going to be a problem. But you really must make sure that however your fairly drastically modded suspension ends up, that the upper arms swing through an arc that wants to keep the inner and outer bolts parallel. If the outer end travels through an arc that makes that end's bolt want to skew away from parallel with the inner bolt, you will build up enormous binding and compressing forces in the bushes, chew them out and hate life. The suspension compliance can actually be dominated by the bush binding, not the spring rate! It may be the case that even something like the GKTech arm won't work if your suspension kinematics become too weird, courtesy of all the cut and shut going on. Although you at least say there's no binding now, so maybe you're OK. Seeing as you're in the build phase, you could consider using R33/4 type upper arms (either that actual arm, OEM or aftermarket) or any similar wishbone designed to suit your available space, so alleviate the silliness of the R32 design. Then you can locate your inner pivots to provide the correct kinematics (camber gain on compression, etc).
×
×
  • Create New...