Jump to content
SAU Community

Recommended Posts

Sorry to say that I have lost my BCM code (even my backups were blank). I hear that Nissan Japan won't help anymore and I can't seem to get in touch with TomR33. I still have two keys but I would like to have the code just in case.

Anyone around that can get the codes for me?

Thanks,

  • 2 months later...

Hi everyone, My 2003 Coupe came with only one key. Following earlier posts I emailed Nissan Japan the info from behind the kick panel. They sent the code to Nissan Oz who forwarded it on to my local dealer (country WA) All good so far! Now the dealer is confused as to what key to encode. If anyone out there has been successful in getting a new key, can you please tell me from which Nissan vehicle it came from? I wondered if a Maxima key would do the job. Cheers.

Do you have an aftermarket alarm? Are the black, plastic tags used to disarm it?

Try swapping them around.

Not sure if aftermarket or not. the dealer installed it during compliance. i was told that the black tags must be near the ignition switch. i assume it disables the oem immobiliser.

  • 5 months later...

Sorry for digging up an old post.

I to was only provided one key and my car didnt even come with a remote, so i grabbed the info from my side kick panel and ive e-mailed Nissan Japan, incase they fall through i thought id post my BCM number info here with the hope someone will help me.

Thanks again guys really appreciate it.

post-99966-0-33719000-1359717850_thumb.jpg

Hey Guys,

I know this topic is old but jst letting you know if nissan australia tells you they cant help you with ciding a new key/remote they are liying out their arse, after arguing with a couple of dealers i found one in artarmon "Mildren Prestiege" they were able to code me a new set of keys with remote as well as the full programming of an intelligent key for $301.00 i previously only had the key without the remote, great having all the features

I find it funny that the local dealer calls me to code keys to these cars . it is even more interesting when they hand me thier C3 and a car and a key and a immobiliser code..

nissan japan won't sell me keys and will point me and everyone else wanting keys back to nissan oz who are supposed to point them to the dealer. dealers are told not to touch imports due to the R35.

fun and games..

Dealers should touch them Chris, they should touch them very intimately! lol

Apparently you can just buy the remotes off ebay that can be coded with instructions to your V35, but you need to buy a key to cut separately

IF that's true, then f**k yeah

Edited by Murry33

not entirely. but hey its on the net it must be true...

still need to program the transponder into the car. someone else has to do that

This is the hard part. Still haven't found someone keen to touch mine for less than $150 (which I reckon is a little excessive because they will do non-imports for less than half that! Don't want to pass over my hard earned to some knob with that mentality).

  • 1 year later...

Hey guys, new 2003 350gt owner here.

I only got one set of keys with the car. I have had a browse around on the internet trying to find replacement keys to no real avail.

I have attached a picture of the set. I have figured out that the little button one is my immobiliser key so Ill have to get in touch with the manufacturer of them to see if I can get another from them. But for the main key, is this one shared with any other cars which were available in Australia?

Am I pretty much stuck with dealing with Nissan Australia to buy the actual spare and then can I get it cut at other places (I have seen Bells Locksmith/Abbotts Locksmith/JapLink mentioned) or do I just pull out the KY and warm up my credit card swiping arm?

qxFYAD0l.jpg

you can get the physical keycase and blade on ebay - http://www.ebay.com.au/itm/NISSAN-3-BUTTON-REMOTE-KEY-SHELL-KEY-CASE-MICRA-350Z-PATHFINDER-NAVARA-/221126171658?_trksid=p2054897.l5659

However, you are going to need the immobilizer chip and remote central locking module and then have your car programmed to accept it. I am not sure if any ADM model nissans use the same type of keychip and/or central locking remote.

If you can find out if another ADM nissan does, you could try to find a 2nd hand key, take the keychip and remote board out, fit it to the case from ebay above, have the key cut at any locksmith, Then take the car to Nissan to have them program the BCM to accept both keys and both remotes.

Edited by sonicii

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...