Jump to content
SAU Community

Recommended Posts

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

Updated again

Bold shows changes from original ad

6x550 side feed blitz injectors in rb25 rail sold

r33 rb25det Power fc inc hand controller sold

r33 S1 RB25DET gearbox with custom 1 piece tail shaft suit r32, modified GTR speedo drive, slave cylinder and modded cross member sold

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt indicators, pair sold

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

And the after market bits

Trust remote mount oil cooler sold

Xtreme XHD 9 puck clutch kit This is now an xhd pressure plate (1040kg or so) with an exedy full face friction plate that is near new. $250

Cusco comp coilovers damper and height adjustable front and rear 8/6 sold

Cusco master cylinder brace suit 32gtst/gtr sold

Whiteline 24mm front sway bar sold

rb20/26/s1rb25 splitfires $400

Trust type R bov sold

Just jap B pillar brace $100

Cusco castor rods bent $75 firm

Maltech braided brake lines ADR compliant $250

Just Jap adjustable front upper control arms sold

Stock front upper arms with nolathane adjustable bushes sold

2 Davies craig 14inch thermos sold

early model hks rb25det cams 256 8.8/264 9.0 inc adjustable exhaust wheel $650.

s1 rb25, no coils, no turbo no injectors. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

cheers

Dave

G'Day Mate,

Do you have the speedo Cable and the bit right behind the speedo itself.

If so how much. (Ill internet Bank it into you bank account immediately :-))

Postage to Tassie reqd.

Cheers

Brett

  • 2 weeks later...

And again

Bold shows changes from original ad

6x550 side feed blitz injectors in rb25 rail sold

r33 rb25det Power fc inc hand controller sold

r33 S1 RB25DET gearbox with custom 1 piece tail shaft suit r32, modified GTR speedo drive sold

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt indicators, pair sold

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

rb25 clutch slave $50

And the after market bits

Trust remote mount oil cooler sold

Xtreme XHD 9 puck clutch kit This is now an xhd pressure plate (1040kg or so) with an exedy full face friction plate that is near new. $250

Cusco comp coilovers damper and height adjustable front and rear 8/6 sold

Cusco master cylinder brace suit 32gtst/gtr sold

Whiteline 24mm front sway bar sold

rb20/26/s1rb25 splitfires sold

Trust type R bov sold

Just jap B pillar brace $100

Cusco castor rods bent $75 firm

Maltech braided brake lines ADR compliant $250

Just Jap adjustable front upper control arms sold

Stock front upper arms with nolathane adjustable bushes sold

2 Davies craig 14inch thermos sold

early model hks rb25det cams 256 8.8/264 9.0 inc adjustable exhaust wheel $650.

s1 rb25, no coils, no turbo no injectors. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

And still no one wants some perfect condition hks cams and an adjustable wheel for cheap!

i do, It'll be hanging off the back of the engine somewhere.

I saw your wtb but figured it'd be quicker for you to get a new one local than me post down a 130k old one so left it alone.

The bits that are left....

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

s1 rb25det, no coils, no turbo no injectors. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

rb25 clutch slave $50

And the after market bits

Just jap B pillar brace $100

Maltech braided brake lines ADR compliant $250

early model hks rb25det cams 256 8.8/264 9.0 inc adjustable exhaust wheel $650.

plus a heap of random crap thats still got to be pulled out of the shell

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...