Jump to content
SAU Community

Recommended Posts

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

Updated again

Bold shows changes from original ad

6x550 side feed blitz injectors in rb25 rail sold

r33 rb25det Power fc inc hand controller sold

r33 S1 RB25DET gearbox with custom 1 piece tail shaft suit r32, modified GTR speedo drive, slave cylinder and modded cross member sold

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt indicators, pair sold

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

And the after market bits

Trust remote mount oil cooler sold

Xtreme XHD 9 puck clutch kit This is now an xhd pressure plate (1040kg or so) with an exedy full face friction plate that is near new. $250

Cusco comp coilovers damper and height adjustable front and rear 8/6 sold

Cusco master cylinder brace suit 32gtst/gtr sold

Whiteline 24mm front sway bar sold

rb20/26/s1rb25 splitfires $400

Trust type R bov sold

Just jap B pillar brace $100

Cusco castor rods bent $75 firm

Maltech braided brake lines ADR compliant $250

Just Jap adjustable front upper control arms sold

Stock front upper arms with nolathane adjustable bushes sold

2 Davies craig 14inch thermos sold

early model hks rb25det cams 256 8.8/264 9.0 inc adjustable exhaust wheel $650.

s1 rb25, no coils, no turbo no injectors. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

cheers

Dave

G'Day Mate,

Do you have the speedo Cable and the bit right behind the speedo itself.

If so how much. (Ill internet Bank it into you bank account immediately :-))

Postage to Tassie reqd.

Cheers

Brett

  • 2 weeks later...

And again

Bold shows changes from original ad

6x550 side feed blitz injectors in rb25 rail sold

r33 rb25det Power fc inc hand controller sold

r33 S1 RB25DET gearbox with custom 1 piece tail shaft suit r32, modified GTR speedo drive sold

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt indicators, pair sold

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

rb25 clutch slave $50

And the after market bits

Trust remote mount oil cooler sold

Xtreme XHD 9 puck clutch kit This is now an xhd pressure plate (1040kg or so) with an exedy full face friction plate that is near new. $250

Cusco comp coilovers damper and height adjustable front and rear 8/6 sold

Cusco master cylinder brace suit 32gtst/gtr sold

Whiteline 24mm front sway bar sold

rb20/26/s1rb25 splitfires sold

Trust type R bov sold

Just jap B pillar brace $100

Cusco castor rods bent $75 firm

Maltech braided brake lines ADR compliant $250

Just Jap adjustable front upper control arms sold

Stock front upper arms with nolathane adjustable bushes sold

2 Davies craig 14inch thermos sold

early model hks rb25det cams 256 8.8/264 9.0 inc adjustable exhaust wheel $650.

s1 rb25, no coils, no turbo no injectors. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

And still no one wants some perfect condition hks cams and an adjustable wheel for cheap!

i do, It'll be hanging off the back of the engine somewhere.

I saw your wtb but figured it'd be quicker for you to get a new one local than me post down a 130k old one so left it alone.

The bits that are left....

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

s1 rb25det, no coils, no turbo no injectors. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

rb25 clutch slave $50

And the after market bits

Just jap B pillar brace $100

Maltech braided brake lines ADR compliant $250

early model hks rb25det cams 256 8.8/264 9.0 inc adjustable exhaust wheel $650.

plus a heap of random crap thats still got to be pulled out of the shell

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...