Jump to content
SAU Community

Recommended Posts

Hi guys,

Please be informed that Just Jap Auto Imports in Sydney was broken into, we believe last night (Sunday 20/7/2008) and a huge amount of parts and cars have been stolen so we are appealing to everyone to please keep a look out and contact us, or the police immediately if you hear/see anything.

We are still putting all the information together of exactly what was stolen but here is a rough list to get started.

NEW PARTS

- Splitfire Coil Packs - Multiple Sets - All Models

- HKS GT-RS Turbine Kits - RB26

- HKS GT-SS Turbine Kits - RB26

- HKS GT-RS Turbine Kits - RB25

- Motul Oils & Lubricants/Fluids - Everything

- Loads of Nismo Parts & Merchandise

- Sard Injectors - Multiple Sets - All Models

- Around 80 Sets of Conrods, I-Beam & H-Beam - Brown unlabelled boxes for RB26, RB26, 1JZ, 2JZ, 4A-GE, EJ20, SR20 & more)

- Tomei Turbine Outlets Sets - RB26 (Multiple Sets)

- HKS Dump Pipe Set - RB26

- HPI Dump Pipe Set - RB26

- G4 Racing Brake Kits - Multiple sets including some for Holden Commodore & Ford Falcon (Note: G4 is exclusive to Just Jap)

- G4 Coilovers - Multiple Sets

- Brand New RB26 N1 Engine (Complete with HKS GT-SS's, Tomei Poncams, Sard Fuel Rail, Sard Injectors - All Brand New)

- Brand New Rays Volk GT-C Wheels - Custom Grey Centre (BCNR33 Offset) 19 x 10.5) - 1 Set in boxes.

USED PARTS

- 4 Sets of R34 GTR Wheels

VEHICLES

- Yellow Mitsubishi EVO 7 - Stock Standard

- Grey R32 GTR - Heavily Modified

- Grey R32 GTR - N1 Engine, rough paintwork

R35 GTR PARTS

- R35 GTR Wheels & Tyres (1 Set) Possibly more, yet to be confirmed

- R35 GTR Brembo Brake Calipers

- Mines R35 GTR 400mm Front & Rear Brake Rotors (Only Set in Australia)

brakes35.jpg

OTHER PARTS

- SR20DET Red Top Shop Demo Engine (Blown) - Used to Display Parts (JJR Exhaust Manifold, JJR Turbo, JJR Pulley Kit, JJR Sump

- Various Tools

More information to come shortly.

Further to the above list, we have been taken offline, so we also ask our loyal customers to please be patient at this time. Our website remains open, and we will do everything in our power to attend to customer orders as quickly as possible, but expect that there will be delays.

We greatly appreciate everyones assistance.

Regards,

Steve Thatcher

Just Jap Racing

  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

OH MY DEAR GOD!

That's f**ked...

And that's a LOT of shit too...

Hope you find em Steve :D

Thanks mate, there is a LOT gone, the above isn't even scratching the surface.

The R35 GTR parts listed were stripped off the Donut King R35 GTR, which was up on the hoist in the second warehouse.

The 3 cars that were stolen, was taken with keys, stolen from our locked and secured cabinet.

They obviously aren't very smart. A set of R35 GTR rims being sold will have to be sold to a select few. I myself can nearly name every single R35 GTR owner in Aus...

It's still f**ked though, that's a low act. Not something you want to come back after a weekend to find...

Thanks guys:

This is one of the R32 GTR's that was stolen:

- G4 8 Piston Front Brake Kit

- Gunmetal Grey

- New N1 Engine

- Rough Paintwork

- Stock Intercooler (With Greddy Logo in white)

- Old Type Volk Racing Wheels (Gold Centre)

theftgtr1a.jpg

theftgtr1b.jpg

theftgtr1c.jpg

I'm trying to get my car out of there sometime this week (probably thursday), so you have one less thing to worry about.

I'll let you know what I've organised!

Cheers,

Andrew.

I'm trying to get my car out of there sometime this week (probably thursday), so you have one less thing to worry about.

I'll let you know what I've organised!

Cheers,

Andrew.

Thanks Andrew.

Have you had anyone new in there walking around the workshop... sounds like they new what they were there for...

I don't think you would get that much stuff walking in not knowing the place...

We had an issue last week with some customers, which both we and the police are looking into.

It was a professional job, no doubt at all.

All security was disabled, phone lines cut, you name it.

very bad news. I saw nick this morning when he got the call from Darron.

I'm sorry to hear this happen to you guys Steve and Darron, and hopefully given the nature of some of the parts stolen they can be recovered and these theives brought to justice.

and for every body else, always do your best to establish the bona fides of whatever parts you buy off forums etc.

Far out... this is horrible.

that's a major haul.

obviously another Racket happening in sydneytown.

They seem to happen in waves.

They obviously have a large storage area to keep 3 cars and all these parts.

Would insurance even cover these R35 parts?

Is there an actual value on them?

Hope things work out.

a theft this big will surely have decent attention from cops.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...