Jump to content
SAU Community

Recommended Posts

simply put - in a stock car it serves its purpose.

once you modify things (from tyres, suspension, wheels, more power etc) its no longer really useful and makes the car feel unbalanced.

I had it in my stock HR31 years ago, suited the factory suspension and everything well.

Had no place in my GTS-R with everything modified however

thats what it was basically designed for but like stated above each to there own opinion some dont mind having it and some lock it out.

It depends on how modded the car is also.

Mine is stock and at the moment its not doing me nay harm

Interesting Anecdotes about 4WS Cars.

Generation 3 Honda Prelude used a mechanical 4WS bar set-up which enabled this coupe to corner at blistering speeds.

Wiki states that this car came 2nd only to a Lambo in a slalom test! I've driven this car and in its day it had remarkable cornering ability. Sitting in the rear, it seemed unnerving as if you were in a slide or about to oversteer.

Mazda MX-6 prided itself on how it had a superb electronically controlled 4WS system. Unfortunately, if it ever broke down, the rear wheels developed a reputation in defaulting to a full-lock position.

Nissan R32 GT-R with its HICAS helped the Group A team to an unprecedented no. of track wins. Heavily modified R33s and R34s commonly took them off, not just for wt. saving but to give the driver more steering feel according to reports. The Nissan Skyline GTR DVD by Duke is where Dirk Shoisman and other track guys here on SAU can give better reasons than I can, as to why the system is removed.

Generation 4 Honda Prelude (VTiR model only) had an electronic 4WS system. It was not as abrupt in its adjustment of the rear wheels during tight cornering as its predecessor. If it ever broke down, the rear wheels would default to a straight position. My daily (VTiR) seems very well planted on sweepers - but not so on tight corners being FWD.

Generation 5 Honda Prelude VTiR model AU version never had a 4WS system. It was an option in Japan. Australia did however have an ATTS model where say, on a left hand sweeper, the outside or right hand wheels would automatically rotate quicker to enable turning to be tighter and for steering to have more feel than any previous 4WS set-up.

It is speculated that the ATTS system is being trialled on the new project Honda NSX.

The HICAS is more so a parking aid and used for handling / cornering perposes.

When you turn the steering wheel, left or right, the rear wheels will turn in the opposite direction of what the front are.

1st time GTR drivers will tend to 'Oversteer' the car as they are not use to the HICAS and the rear kicks out alittle.

I think it can interfere with your cornering, thats why a lot of ppl dis-like it.

4WS (4 Wheel Steer) or 4WD (4 Wheel Drive) or AWD (All Wheel Drive). I see it that it's tied in with the cars ATTESA E-TS.

The HICAS is more so a parking aid and used for handling / cornering perposes.

When you turn the steering wheel, left or right, the rear wheels will turn in the opposite direction of what the front are.

1st time GTR drivers will tend to 'Oversteer' the car as they are not use to the HICAS and the rear kicks out alittle.

HICAS is not a parking aid, its approx 1 degree of movement from the rear wheels, its for cornering and its only at certain speeds or something similar, I don't know the technical details.

The HICAS doesn't really kick the rear out as such, but it does confuse most drivers who have it when they lose control as it makes the car less predictable, that's why anyone who does circuit work will remove it.

I had some issues with it on the street, for some reason my one didn't like highway's and I was planning to do track occasionally so I spent $80 removing it :cool:

HICAS is not a parking aid, its approx 1 degree of movement from the rear wheels, its for cornering and its only at certain speeds or something similar, I don't know the technical details.

The HICAS doesn't really kick the rear out as such, but it does confuse most drivers who have it when they lose control as it makes the car less predictable, that's why anyone who does circuit work will remove it.

I had some issues with it on the street, for some reason my one didn't like highway's and I was planning to do track occasionally so I spent $80 removing it ;)

I find it does help with parking IMO.

I think the rear wheels turn 1 degree when the car is travelling over 80km/h.

'Kick out', as in I meant it can give that feeling as if the car was tail happy... But anyway.

But if you can get use to it, the car can be fun to drive, kinda keeps you on the edge sorta. Like you said its less predictable but I can see it would be a b!tch when circuit racing.

Im going for my 1st trackday in my R33 in a few weeks. Have had plenty of experience in my old ITR, but im a little nervous of the RWD Turbo ;)

Would you recommend removing it before the day? Or just giving it a go with it and see how i do?

When you turn the steering wheel, left or right, the rear wheels will turn in the opposite direction of what the front are.

Not 100% sure but i thought they turned in the same direction as the front wheels not the opposite. i remember seeing it on the Duke dvd!!! I could be wrong though.

Im going for my 1st trackday in my R33 in a few weeks. Have had plenty of experience in my old ITR, but im a little nervous of the RWD Turbo :closedeyes:

Would you recommend removing it before the day? Or just giving it a go with it and see how i do?

Good luck :)

It's safe to leave it there and have a go, but for track days the recommendation is to remove it, it makes the car a little less predictable especially when you lose the rear.

Its not expensive to remove but you should get a wheel alignment after removing it.

Not 100% sure but i thought they turned in the same direction as the front wheels not the opposite. i remember seeing it on the Duke dvd!!! I could be wrong though.

I remember reading it somewhere... along thoes lines but anyway, it turns either direction LOL!

from the person who said it was a parking aid that is incorrect to my knowledge from what i have read and i even checked it on my car whilst parked and the rear wheels do no move. from memory its something like 40kms an hour it clicks in dont quote me on that.

its for high speed cornering and high speed cornering only.

i took mine out and put a lock bar in as mine was playing up from time to time and i noticed the difference that it made.

as far as cornering in the upper eshelon of speeds it makes a big difference in my opinion which i have noticed in my car.

so in my own conclusion it is a very good idea and is a big advantage if u are wanting to get out on the track and set times but for most average people who would rather be OUT ON A TRACK drifting it is a bit of a pain in the ass

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...