Jump to content
SAU Community

Recommended Posts

Hey guys,

How do you get rid of the mist/fog on your headlights. I've got xennon's on mine and I can see white fog/mist on the plastics. I thought it was on the outside but it appears on the inside. When i go wash the car they disappear but after 10-20 minues they come back.

I know it's an inherent thing with Stagea's but I would like to fix it and keep it clean (man why Nissan couldn't make it glass to save us some time and the headaches)

Link to comment
https://www.sau.com.au/forums/topic/239796-xennon-headlights-mistfog/
Share on other sites

i remember spoting something at supercheap to fix this. it involves removing headlight, pouring in the liquid and moving the light around so all the area gets covered and voila. 1 shinny new looking piece of clear plastic apparently...

I took mine off and took them to a plastics shop where they sanded them back with a very fine sandpaper and then buffed them. They came up great, made them clearer at night and the only thing wrong with them now is the ageing cracks on the inside of the plastic cover. Best bet is to do what the others have said and use a plastic polish, or if you have access to a buff, you could always try sanding and buffing.

Use meguiars PlasticX plastic polish and then protect them with PLEXUS.

i can vouch for this, my old 33 headlights went crappy as they all do, used the PlastX on them, and they came up like literally new.

even ScratchX will work if you have that.

Looks like i'm going to go find some PlastiX and Plexus - where's the best place to buy them from??

RBPOWA - Use it on the outside, most people say it's on the outside where it fogs up and it would be a pain the in you know where if you had to do that on the inside

As I said before why didn't Nissan use glass instead of plastic...we'll never know

I usually get my plexus from marine chandlery shops, great for tail lights as well (originally designed to protect plastic aircraft windscreens). PlastX was harder to find, ask at supercheap maybe.

For those looking for a cheap intermediate solution (while trying to hunt down the above mentioned products)...try using toothpaste. Most toothepastes are mildly abrasive - enough to "polish" the headlights. DO NOT get it on the paint (or anywhere except the plastic headlight) obviously but it will clean up the plastic headlights fairly well if you use a bit of elbow grease (and wash it all off afterwards). I've done it a couple of times before and it works ok - not as good as meguiars PlasticX plastic polish but may be all you need.

WARNING: try it on a small patch of the light first to make sure it works on your car. (end of disclaimer).

brasso works too. ive used it on mine. it got rid of the yellowish hepatitis tint on the headlight :banana:

you hardly have to rub. just apply a small amount on a rag, rub over a small area, give it a minute to dry, and then wipe it off with a clean rag.

i cant compare it to plasticx etc. but it works pretty well for surface issues.

sorry to hyjack ur thread but does anyone have any issues with moisture getting inside their parking lighs on their s1 stags? My passenger side does it and it looks crap IMO. Any ideas on how to fix? I tried some windscreen glue but obversly didnt get all the holes or leaks... any other ideas?

do not use tooth paste . sure it is abbrasive and will polish things BUT unlike actual polish it has no control over the size of the grinding particles . think about it . and dont use it on glasses and cds and everything else someone who thinks their clever has told you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...