Jump to content
SAU Community

Recommended Posts

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Link to comment
https://www.sau.com.au/forums/topic/240727-a-habit-ive-picked-up/
Share on other sites

Do you have an after market fuel pump? If so (and it's nice n loud) turn the key to ignition and listen. After a few seconds you'll hear that the fuel pump stops pumping, it is from that time on that you are wasting your time waiting any further :rofl:

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Hehe - I do the exact same thing - but only from cold (if i know i haven't used the car for hours).

i always let the pump prime, then crank/start.

the fuel system will hold residual pressure for a couple of hours if the checkvalve in the pump is good, so no real need to prime again if the car has only been off for a short period, it should fire straight away.

never been told about this before but i always turn accesories on for a few seconds before cranking it over, stock fuel pump but i can hear things swithcng on before i crank it..... stock or not theres no harm in having everything set up for a couple of seconds before the power is drawn to the coils and what have youfor the task that drains the battery pretty quickly for a start

I can hear my stock fuel pump clear as day (even whilst driving ) but only cuz the rear seat is out and the boot is stripped. When its all in its a lot lot quieter but can hear it on the very initial start up even when everything is actually in the car. I just give it say 2 seconds of key before i start. Never had a problem.

Luke

thanks for all the replys!

what i meant by turning the key twice is that you got two stages before the car starts cranking. The first i beleive is acc. then the next one is on, the third cranks the car.

i usually switch it to on, and wait for fuel pump to prime etc, before turning on the car.

looks like ive been wasting my time!! haha.. but some habits are hard to break eh.

I have something similar - I click my fingers a few times before I open the toilet door to go to the mens room at work.....

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...