Jump to content
SAU Community

Recommended Posts

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Link to comment
https://www.sau.com.au/forums/topic/240727-a-habit-ive-picked-up/
Share on other sites

Do you have an after market fuel pump? If so (and it's nice n loud) turn the key to ignition and listen. After a few seconds you'll hear that the fuel pump stops pumping, it is from that time on that you are wasting your time waiting any further :rofl:

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Hehe - I do the exact same thing - but only from cold (if i know i haven't used the car for hours).

i always let the pump prime, then crank/start.

the fuel system will hold residual pressure for a couple of hours if the checkvalve in the pump is good, so no real need to prime again if the car has only been off for a short period, it should fire straight away.

never been told about this before but i always turn accesories on for a few seconds before cranking it over, stock fuel pump but i can hear things swithcng on before i crank it..... stock or not theres no harm in having everything set up for a couple of seconds before the power is drawn to the coils and what have youfor the task that drains the battery pretty quickly for a start

I can hear my stock fuel pump clear as day (even whilst driving ) but only cuz the rear seat is out and the boot is stripped. When its all in its a lot lot quieter but can hear it on the very initial start up even when everything is actually in the car. I just give it say 2 seconds of key before i start. Never had a problem.

Luke

thanks for all the replys!

what i meant by turning the key twice is that you got two stages before the car starts cranking. The first i beleive is acc. then the next one is on, the third cranks the car.

i usually switch it to on, and wait for fuel pump to prime etc, before turning on the car.

looks like ive been wasting my time!! haha.. but some habits are hard to break eh.

I have something similar - I click my fingers a few times before I open the toilet door to go to the mens room at work.....

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
    • I just stack 2 pieces of 200x50 timber on top of each other. Total length about 900mm, with the top one being a little shorter and both having a 45° angle cut on them to make the front edge a bit of a ramp. Put these in front of each front wheel, drive up on them, throw the trolley jack under. Takes 1 minute. Scissor jacks can eat a bowl of dicks. I never use on under my car unless desperate.
×
×
  • Create New...