Jump to content
SAU Community

Recommended Posts

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Link to comment
https://www.sau.com.au/forums/topic/240727-a-habit-ive-picked-up/
Share on other sites

Do you have an after market fuel pump? If so (and it's nice n loud) turn the key to ignition and listen. After a few seconds you'll hear that the fuel pump stops pumping, it is from that time on that you are wasting your time waiting any further :rofl:

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Hehe - I do the exact same thing - but only from cold (if i know i haven't used the car for hours).

i always let the pump prime, then crank/start.

the fuel system will hold residual pressure for a couple of hours if the checkvalve in the pump is good, so no real need to prime again if the car has only been off for a short period, it should fire straight away.

never been told about this before but i always turn accesories on for a few seconds before cranking it over, stock fuel pump but i can hear things swithcng on before i crank it..... stock or not theres no harm in having everything set up for a couple of seconds before the power is drawn to the coils and what have youfor the task that drains the battery pretty quickly for a start

I can hear my stock fuel pump clear as day (even whilst driving ) but only cuz the rear seat is out and the boot is stripped. When its all in its a lot lot quieter but can hear it on the very initial start up even when everything is actually in the car. I just give it say 2 seconds of key before i start. Never had a problem.

Luke

thanks for all the replys!

what i meant by turning the key twice is that you got two stages before the car starts cranking. The first i beleive is acc. then the next one is on, the third cranks the car.

i usually switch it to on, and wait for fuel pump to prime etc, before turning on the car.

looks like ive been wasting my time!! haha.. but some habits are hard to break eh.

I have something similar - I click my fingers a few times before I open the toilet door to go to the mens room at work.....

Hey guys,

So ever since i got my skyline ive gotten into the habit.

When i turn on my car.. ill turn the key two times and wait until my air bag light turns off (about7 seconds) before i turn it one more time to turn on the car.

My thinking is that it gives the car ecu time to load as well as time for the fuel pump to prime.

Now what im wondering is... i am wasting my time ? is there any side effect of me just turning on the car straight away? Or am i doing the right thing?

Cheers guys,

Brendan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...