Jump to content
SAU Community

Recommended Posts

yeh basically as the title says i have been chasing a manual rwd stagea for a while now but to no prevail.

but seeing tho the AWD can be made into RWD quite easilly i then decided RWD wasnt a nesessaty.

then i decided im going to do sum sort of engine conversion eventually into my stagea so changing from auto to manual at the time wont cost a great deal. compared to the price diff between auto and manual stageas atm.

so i just decided any old awd auto/manual stagea will do me fine.

but cnt decide between series 1 and 2.... was the major differences apart from the lights in the grill?

yeh basically as the title says i have been chasing a manual rwd stagea for a while now but to no prevail.

but seeing tho the AWD can be made into RWD quite easilly i then decided RWD wasnt a nesessaty.

then i decided im going to do sum sort of engine conversion eventually into my stagea so changing from auto to manual at the time wont cost a great deal. compared to the price diff between auto and manual stageas atm.

so i just decided any old awd auto/manual stagea will do me fine.

but cnt decide between series 1 and 2.... was the major differences apart from the lights in the grill?

There is just such a thread on the next page (scroll down to the bottom and click on next page). BTW it is not easy to convert AWD into RWD ...if you're going to repower it just get a n/a car which are mostly RWD.

The RWD and AWD stagea's are quite different structually, and while you CAN run an AWD stagea in RWD mode, there is no real advantage because you are still carrying around all the extra weight of the attessa system. You COULD get your hands on a NA version, but if you are in Australia you will never be able to get it complied as they don't get covered under our SEVS ruling.

i'd get a s1 because they are cheaper and look alot better :P s2 fronts are shocking, definately a turn off in my book anyway.

*gets ready for flaming* :teehee:

if your changing from auto to manual u can just use a rb25 gtst box and it will get rid of the tf case, and an engine conversion will say goodbye to the front diff and sump arrangment. Then all u need is to pull the cv joints out of the front axles and just leave the part that bolts into the hub to hold the wheel bearing in and its done. Oh and remove the atessa pumps above the rear diff if u want.

i'd probably just get the rwd version if u had the choice between the two, but converting a 4wd to 2wd isnt a big drama at all.

:):P:spank::rant:

hehehe nice!

i do like the ser1 front, but its gotta be ser2 rs4s FTW!!!

if ur gonna go manual rwd then i dont think its worth getting a 4wd auto. i think u can get rwd turbo stags. it would save alot of work. but i guess if its cheaper and u have the skills then go for it. just dont forget to post up all ur wicked skid videos. :D

Edited by Raysboostin
its gotta be ser2 rs4s FTW!!!

:P

I think the rwd manual thing has been covered before, and from what my rather damaged

memory can recall, rwd stagea's werent available in manual??? im sure someone will correct

me if im wrong!

so there are NA stageas out there? but they cant be complied in aus? so theres no point in me owning one then ay cause i live in QLD...

well my eventual goals are to put a twin charged ls1 into my stagea and RWD it, so yeh i wuld prefer a stock RWD turbo or non turbo dnt phase me, and auto/manual isnt to much of a problem. rwd > awd is my major concern atm and yeh trying to find a rwd aint easy.

well, in that case you wil DEFINITELY want a RWD stagea complied in australia (the RWD stageas have a completely different shock tower arrangement and a little more room in the engine bay - this is what you will need for a wide angle LS1)

Stageas were offered all the way down to a RWD only powered by a NA RB20E

*shudders*

although why you would want one that spec is a little beyond me....

I'd say the single biggest difference between s1 & s2 is a HUGE 60NM MORE TORQUE in the s2 and at 1000RPM LESS!!

Basically its going to get up and go a lot easier and feel a lot more effortless. The extra ~20kw is just icing on the cake.

In comparison to both, the M35 is only ~30kg heavier and has ~70NM more torque again than the s2, and at the same revs as where the s2 makes its peak torque. So as you can imagine the M35 feels a lot more nimble than the s2.

Torque makes a big difference, particularly in such a heavy car. It also is one of the reasons for the better fuel economy. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...