Jump to content
SAU Community

Recommended Posts

yeh basically as the title says i have been chasing a manual rwd stagea for a while now but to no prevail.

but seeing tho the AWD can be made into RWD quite easilly i then decided RWD wasnt a nesessaty.

then i decided im going to do sum sort of engine conversion eventually into my stagea so changing from auto to manual at the time wont cost a great deal. compared to the price diff between auto and manual stageas atm.

so i just decided any old awd auto/manual stagea will do me fine.

but cnt decide between series 1 and 2.... was the major differences apart from the lights in the grill?

yeh basically as the title says i have been chasing a manual rwd stagea for a while now but to no prevail.

but seeing tho the AWD can be made into RWD quite easilly i then decided RWD wasnt a nesessaty.

then i decided im going to do sum sort of engine conversion eventually into my stagea so changing from auto to manual at the time wont cost a great deal. compared to the price diff between auto and manual stageas atm.

so i just decided any old awd auto/manual stagea will do me fine.

but cnt decide between series 1 and 2.... was the major differences apart from the lights in the grill?

There is just such a thread on the next page (scroll down to the bottom and click on next page). BTW it is not easy to convert AWD into RWD ...if you're going to repower it just get a n/a car which are mostly RWD.

The RWD and AWD stagea's are quite different structually, and while you CAN run an AWD stagea in RWD mode, there is no real advantage because you are still carrying around all the extra weight of the attessa system. You COULD get your hands on a NA version, but if you are in Australia you will never be able to get it complied as they don't get covered under our SEVS ruling.

i'd get a s1 because they are cheaper and look alot better :P s2 fronts are shocking, definately a turn off in my book anyway.

*gets ready for flaming* :teehee:

if your changing from auto to manual u can just use a rb25 gtst box and it will get rid of the tf case, and an engine conversion will say goodbye to the front diff and sump arrangment. Then all u need is to pull the cv joints out of the front axles and just leave the part that bolts into the hub to hold the wheel bearing in and its done. Oh and remove the atessa pumps above the rear diff if u want.

i'd probably just get the rwd version if u had the choice between the two, but converting a 4wd to 2wd isnt a big drama at all.

:):P:spank::rant:

hehehe nice!

i do like the ser1 front, but its gotta be ser2 rs4s FTW!!!

if ur gonna go manual rwd then i dont think its worth getting a 4wd auto. i think u can get rwd turbo stags. it would save alot of work. but i guess if its cheaper and u have the skills then go for it. just dont forget to post up all ur wicked skid videos. :D

Edited by Raysboostin
its gotta be ser2 rs4s FTW!!!

:P

I think the rwd manual thing has been covered before, and from what my rather damaged

memory can recall, rwd stagea's werent available in manual??? im sure someone will correct

me if im wrong!

so there are NA stageas out there? but they cant be complied in aus? so theres no point in me owning one then ay cause i live in QLD...

well my eventual goals are to put a twin charged ls1 into my stagea and RWD it, so yeh i wuld prefer a stock RWD turbo or non turbo dnt phase me, and auto/manual isnt to much of a problem. rwd > awd is my major concern atm and yeh trying to find a rwd aint easy.

well, in that case you wil DEFINITELY want a RWD stagea complied in australia (the RWD stageas have a completely different shock tower arrangement and a little more room in the engine bay - this is what you will need for a wide angle LS1)

Stageas were offered all the way down to a RWD only powered by a NA RB20E

*shudders*

although why you would want one that spec is a little beyond me....

I'd say the single biggest difference between s1 & s2 is a HUGE 60NM MORE TORQUE in the s2 and at 1000RPM LESS!!

Basically its going to get up and go a lot easier and feel a lot more effortless. The extra ~20kw is just icing on the cake.

In comparison to both, the M35 is only ~30kg heavier and has ~70NM more torque again than the s2, and at the same revs as where the s2 makes its peak torque. So as you can imagine the M35 feels a lot more nimble than the s2.

Torque makes a big difference, particularly in such a heavy car. It also is one of the reasons for the better fuel economy. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...