Jump to content
SAU Community

Recommended Posts

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

recieved a few deposits and the full payment from you nytsky. I will be paying 6boost tomoro for their manifolds... those who are paying next week may have to wait until after the new year for their manfiold.

thanks guys, ill update properly tomoro

recieved a few deposits and the full payment from you nytsky. I will be paying 6boost tomoro for their manifolds... those who are paying next week may have to wait until after the new year for their manfiold.

thanks guys, ill update properly tomoro

/quote]

money deposited in full into your acc

recieved a few deposits and the full payment from you nytsky. I will be paying 6boost tomoro for their manifolds... those who are paying next week may have to wait until after the new year for their manfiold.

thanks guys, ill update properly tomoro

Good stuff Leon.

I just hope the gear that i sent up gets there on Monday.

Can Kyle guarantee my manifold ect will be delivered before xmas?

And the manifold comes with new studs,washers ect?

Okay deposits have been made.. There is still a few people i havent sorted, i will send PMs, just not sure on what wastegate and turbo etc you running.. thanks fellas. update soon.

Hopefully all the manifolds will be at your door step within 2 weeks

ca18gem - $100

CA18 High mount T25 flange internal gate (suit gt2860rs)

bigadz - $840

SR20DET lowmount manifold

gibbau Zac Gibson - $100

Split pulse RB25 high mount T4 flange

Pickup

Tamimego - $100

SR20 Low mount internal gate t28 flange

choku_dori - $1880

Split pulse RB25 in r32, highmount external 44mm gate t3 flange (suit 3540/3037)

Split pulse SR20 s14a highmount external 44mm gate t28 flange (suit HKS 2835)

blockasR32 - waiting

Split pulse RB26/30 High mount external 50mm gate

NYTSKY (david hennessy) - $1370

Sorted out with kyal

R34NUR - $1350

Still sorting details

Quick query..

Price on bare (no wrap, spray)... 26 to suit 35R with 44mm gate?

Cheers

Tomek

$1140 delivered.

------------------------------------------------------------

ca18gem - $840

CA18 High mount T25 flange internal gate (suit gt2860rs)

bigadz - $840

SR20DET lowmount manifold

gibbau Zac Gibson - $100

Split pulse RB25 high mount T4 flange

Pickup

Tamimego - $840

SR20 Low mount internal gate t28 flange

choku_dori - $1880

Split pulse RB25 in r32, highmount external 44mm gate t3 flange (suit 3540/3037)

Split pulse SR20 s14a highmount external 44mm gate t28 flange (suit HKS 2835)

blockasR32 - $200

Split pulse RB26/30 High mount external 50mm gate

NYTSKY (david hennessy) - $1370

Sorted out with kyal

R34NUR - $1350

RB26 Twin turbo low mount stock flange

5 manifolds built guys, 4 to go. All manifolds will be gone monday, hoping tjis gives enough time for delivery pre christmas. Also NYTSKY, I have not recieved your turbo or manifold, can you please call me asap so we can chase it up, I need it by friday to get your manifold done this year. If anyone is yet to make payment, please do so NOW, as by the time it clears to Leon's account, then to mine, we will be running out of time to get these out.

Kind Regards.....................Kyle

  • 3 weeks later...

I'm still waiting for mine :P

originally was promised before christmas, then the coaters were taking a break

and it would be first week of january, then this week, now nobody tells me nothin :P

edit: I had to chase up Kyle and he just said it is still down to delays at the ceramic coating place..

Edited by r34nur
I'm still waiting for mine :P

originally was promised before christmas, then the coaters were taking a break

and it would be first week of january, then this week, now nobody tells me nothin :P

edit: I had to chase up Kyle and he just said it is still down to delays at the ceramic coating place..

The coaters were on holiday until the 12th of Jan. There is about a week turnaround from them. Kyle told me ill get mine early next week, so sounds about right.

Kyle is a top bloke and the fact that the coaters were on holiday was something out of his control. The manifolds were all built before xmas so his part of the job was done.

The coaters were on holiday until the 12th of Jan. There is about a week turnaround from them. Kyle told me ill get mine early next week, so sounds about right.

Kyle is a top bloke and the fact that the coaters were on holiday was something out of his control. The manifolds were all built before xmas so his part of the job was done.

Yep he even went out of his way to make sure Dave's was done. :P

Well i have just ordered mine as i cant wait for another group buy.

But i know of a few people who are looking for one, and the manifolds haev recently had a price rise...but Kyle has stated that if another group of at least 8 people were to be interested in manifolds then another Group Buy can be easily arranged.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...