Jump to content
SAU Community

Recommended Posts

IF you own a skyline you soon will! haha have fun fixing stuff ; )

Hahaha yerp i own a skyline as well, done a whole heap on that i can tell you, but yer haven't really been involved in the heavy industry for a whole lot of time so still learning things...

  • 3 weeks later...

Do it yourself. Half the fun.

And don't say "I don't know how", the internet (and this forum) can be incredibly helpful. We all start somewhere.

Yeah it is a piece of piss once you have done it once, only way to learn is to do shit yourself. If you said 'I dont know how' with every problem in life you'd still be sitting in your cot sucking a dummy.

Honestly though it is not a hard job, nothing like changing a turbo or an engine, lots of easy to get to bolts and they pop out. Always good to keep a set of stock springs/shocks for occasions like this.

Ok - help me out here, going for an identity check - what's defectable?

- APP 2 piece front rotors

- Varis CF Rear diffuser

- Tomei Ti catback

- HKS dump+front pipe

- Password JDM CF engine bay + intake kit (just carbon fiber dressup for the engine bay)

- Carbing front strut brace

- Carbing rear strut brace

- Carbing lower arm bar 2 point

- Carbing center frame brace

- APP Brake lines

- ARC Oil cooler

- Whiteline front+rear sways

Currently has a tomei ti test pipe, obviously putting back the stock cat, and has coilovers, again putting back the stock suspension.

Everything else should be good i reckon? Only thing might be exhaust noise?

  • 1 month later...

would appreciate a bit of help here guys, ive never been defected before, but we all know its only a matter of time before i do get defected. just want to know if a few things i have are defectable.

i have an r33 series 1 gts-t. i have put a series 2 steering wheel on it, have done a homemade job of re wiring up the horn so as to save myself buying a series 2 clock spring. that is ok i believe, what im not sure about is whether the series 2 airbag steering wheel on a series 1 non airbag skyline is defectable if i have the airbag removed. to be honest there is nothing wrong with it in my opinion, but it depends how picky they really are.

also i have the tweeters of my stereo just doubled side taped to the side of my car up above my head. is it illegal to have them up there? as i know boost gauges up there are defectable etc etc

also ive got a boost gauge flush mounted to my dash, next to my cigarette lighter.

i have a trust front mount intercooler, splitfire coil packs, and i have a series 2 front bar with the fog lights obviously not wired up as there is no use/need for them.

also , how do i know if my car is too low or loud??

i have a 3 inch exhaust technology dump pipe, high flow cat, and 3.5 inch cat back exhaust running no muffler or resinator. its insanely loud. i want to get a new cat back exhaust, but dont want to spend the money on something that is still defectable.

it also has a complete engine replacement, with a series 2 engine being put in. i take it there is nothing wrong with that?

anyones help is greatly appreciated.

  • 4 weeks later...
- Password JDM CF engine bay + intake kit (just carbon fiber dressup for the engine bay)

Unless ADR approved defectable, you'll need a stock bonnet 99% sure.

- APP Brake lines

Unless they are ADR approved defectable.

Everything else should be good i reckon? Only thing might be exhaust noise?

Make sure you have a CAT and exhaust is legal DB and you will be ok.

would appreciate a bit of help here guys, ive never been defected before, but we all know its only a matter of time before i do get defected. just want to know if a few things i have are defectable.

i have an r33 series 1 gts-t. i have put a series 2 steering wheel on it, have done a homemade job of re wiring up the horn so as to save myself buying a series 2 clock spring. that is ok i believe, what im not sure about is whether the series 2 airbag steering wheel on a series 1 non airbag skyline is defectable if i have the airbag removed. to be honest there is nothing wrong with it in my opinion, but it depends how picky they really are.

Sounds like they wont even notice anyway providing the horn is working, as long as the airbag as been removed I really see no issue here.

also i have the tweeters of my stereo just doubled side taped to the side of my car up above my head. is it illegal to have them up there? as i know boost gauges up there are defectable etc etc

It isn't so much that boost guages are illegal, it is where they are mounted, if you mount anything at all on the A-Pillar, somewhere it obstructs view or where you could hit your head on it in an accident it needs to be removed. The fact it is a boost gauge has nothing to do with it.

also ive got a boost gauge flush mounted to my dash, next to my cigarette lighter.

i have a trust front mount intercooler, splitfire coil packs, and i have a series 2 front bar with the fog lights obviously not wired up as there is no use/need for them.

also , how do i know if my car is too low or loud??

Intercooler is fine as long as no structural parts have been cut. You measure the exhaust volume with a dB meter, if it is above the legal limit then it is illegal. If the car is below the legal eyebrow height (you'll need to call regency park hotline to find this out) or it is below 100mm at the lowest point then it is too low.

i have a 3 inch exhaust technology dump pipe, high flow cat, and 3.5 inch cat back exhaust running no muffler or resinator. its insanely loud. i want to get a new cat back exhaust, but dont want to spend the money on something that is still defectable.

it also has a complete engine replacement, with a series 2 engine being put in. i take it there is nothing wrong with that?

anyones help is greatly appreciated.

If your engine numbers dont match you need to fill out a form saying change of engine, no issue with this though. I'd recommend getting a stock exhaust for the regency visit then putting your old one back on afterwards. If you aren't happy with the volume keep adding inline straight through large bodied oval mufflers until it is the volume you like, shouldn't be more than $200 per muffler fitted.

Edited by Rolls
  • 3 weeks later...

How many of you guys have got through regency with aftermarket fuel rail + injectors etc? I have an alloy fuel rail with an aftermarket fuel reg and GTR injectors, I'm going to take it through with them still in there as Im quite sure they will fail me on a few things so I'd like to get a nice list. So yeah anyone got through with aftermarket injection? I've painted everything matte black so it doesn't stand out like dogs balls, but I get the feeling they are pretty switched on.

Defected down the bay for going around a round about and they saw my lights, defected by SA polices top import car specialist Neil the bald pom, who didn't know anything about what he was looking at, just knew where to look.

Just a warning to all you guys out there for the apparent $410 per item defect!!

none because he said i wasnt a wanker about it and i played his game - truth or dare - fair wierdo if you ask me, didnt even know what he was looking at half the time, straight past all the ebc shit under the bonnet...

none because he said i wasnt a wanker about it and i played his game - truth or dare - fair wierdo if you ask me, didnt even know what he was looking at half the time, straight past all the ebc shit under the bonnet...

Sounds like he might have been the one who did me last Friday, bald, slightly overweight guy?

edit: N Hastie was the name on the fine, same guy? said identical stuff to me if it wasn't him, also a weirdo who found my boost controller in my ash tray in 10 seconds flat, first thing he did was pull the ash tray out without checking anything else. Wrote it down as 'turbo timer' though.

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not a problem at all Lithium, I appreciate your help regardless. I've pulled a small part of a log where the target pressure was 28psi and it spiked to 36.4psi. I've only just begun using Data Log Viewer so if I'm sending this in the wrong format let me know.
    • Sorry had a bit of a week and haven't had heaps of time to follow this, so apologies if I've missed something - any chance of showing a log with the rpm, turbo speed, MAP, and wgdc all in one view? Definitely an "interesting" problem, and while it's definitely worth noting that there was a similar issue with the twins I'd not completely put all bets on the root cause being the same thing.  Keep an open mind, follow the data.
    • I built this engine approximately 12 years ago so my own head (brain) is a little grey on the exact hardware in the RB head, however what I recall is. Stock RB25 NEO TURBO Intake Camshaft HKS 260 degree Exhaust Camshaft (R34 GTR) RB25 NEO Turbo Springs  I ported/removed the exhaust stud humps found in the RB25 head so theres less turbulence but it wasn't ported/polished properly, just a hump removal. I've attached two pictures of the before and after to illustrate.     The ECU gets its boost reference from the nipple on the rear of the head on the intake side, behind the fuel rail. The wastegate gets its boost reference from a nipple on the cooler pipe immediately after the comp cover.  Could a decent pressure drop across the intercooler cause the wastegate to be seeing a higher PSI than what the ECU is seeing, and thus it can't control it accurately and quick enough?   We ran a line to the actuator and watched it open and close using an air compressor, while we didn't have a gauge on the line to see when it was cracking open, it was opening smoothly.  I just removed the gate now and even though the documentation says you need to open it in a vice due to preload (which I did), there wasn't any preload on the cap, which is something we noticed straight out of the box as well when new. This silver cap internally is threaded to the actuator rod that runs out the bottom of the straightgate. Not sure how I'm supposed to get this spring out to be frank.. Potentially but everyone else doesn't appear to have to stop at 500kw because of 6boosts design.  I would, but I think I'm getting to that point where if I'm going to do the head and make another 100kw, then I'm going to need a fancy gearbox and quite a few other things and 10k becomes 20k becomes 30k within a few months. I'm not necessarily sold on the idea just yet that the head is restrictive at 4000rpm (and what.. 300kw?) and yet doesn't seem to be restrictive at 7000rpm when it's making 500kw, however I'm obviously not closing the door on that theory.
    • Yeah - Half the problem is I know this sensor actually goes to 150C.. I'm pretty certain it is min of 11C. So still more data required I suppose. It's really quite hard to get the oil temp to 100+ then immediately pull over and take a reading before the temp drops. Annoyingly I suppose the range I really 'want' is likely 80 -> 120C. TBH the ecu can't really *do* anything with it, and the gauge itself is very visible... ...but you know how it is.
    • My EFR 8474 Black, made 800awhp on a roller dyno. at 25-26psi. E85. Shaft speed was around 106,000rpm 1.01 rear. The rear is maxed.  6 boost Turbosmart 60mm gate 3.5inch exhaust  Head is worked to the shithouse. Bain racing. VCam. 272 exhaust. RB28 - RB26 foundation.  You have an intake issue. Start getting proper data and I mean go back to the simple things.  - Pressure test your intake - Block off the Turbo BOV, you don't need it.  - Test pressure before and after your intercooler If your head is pretty stock, that is your issue. Especially if it is NA.  Take it off and spend $10k on it. 
×
×
  • Create New...