Jump to content
SAU Community

Recommended Posts

in that socket 1155 they make i5 and i7 to suit

also the i7 has 2mb more cache and 100mhz faster i have just done a simple OC and im pushing 4ghz on the 1333 sniper ram more than enough to play BF3 once they polish the game more i should get a few more frames

ati cards always have driver / game issues, which is why I avoid and don't reccomend them to people (apart for use in HTPC or other non gaming).

TBH if you're sticking with 7200rpm drives in a new build you should damn well make sure that you're buying the fastest one with the most cache etc you can afford. Got me stumped how people are willing to lash out on processors etc but leave their drives as the bottleneck! (unless your budget really is that tight)

EDIT: furthermore to this, we are starting to exclusively rollout Vertex 2 spec SSDs in the next batches of workstations we are getting at work because it's become THAT much of a bottleneck.

Edited by bozodos

Hmmm i have run ATi since my 9800pro i danced with the devil for 4days while owning a 6800gtx but it didn't perform as good as the top ATi back then if i recall was the x800xt pe i ended up with a x850xt pe 1gb and was very happy i have always been happy with the cards games and anything i throw it it

i don't really OC my gfx cards or my systems by much

had a lot of bad times with my 4830 all driver related, did overclock the shit out of it in the end though hahaha.

Catalyst always seems to break shit; we run ATi in our Dell Optiplex fleet due to there being a lack of a Nvidia option, and the only issues we have are again drivers. Kinda fanboyish I know, but I've never had a problem with compatability from owning a TNT2 onwards with Nvidia cards.

yeah i had a TNT2 that was great i hod the old pci version when AGP just came out used to play sof2 with it and get all of 20fps

i keep my drivers updated too

and i don't always buy games when they're at there peak price

i may preorder bf3 however

So I'm going to get a i7 2600k along with a Z68 mobo of some kind just wondering what is a good aftermarket cooler for it?

I currently have a Zalman for my Q6600, seem to work fine.

Also what is currently the best bang for buck SSD out? Looking at the $250 - $350 mark. Only need 60Gb or so as it is only to be a OS drive. I'm getting a 600GB raptor for my games & all my old HDDs will carry over as storage drives.

My current gen 1 SSD is starting to die I think (randomly windows will freeze up & upon reboot, windows disk checker will pick up & fix some random corrupted files on the main OS drive).

SNIP

mobo: gigabyte Gigabyte GA-Z68MA-D2H-B3 $139 (you will want to know how many slots you want to use if using dual gfx you may loose the other pcie slot)

CPU: i7 2600 $285

Snip

i5 2500k will be more than enough for your intended purpose

I wouldnt bother with a locked 2600, an overclocked 2500k will surpass it with ease, as well as being about $75 cheaper.

With the money you save you can also get yourself a decent CPU cooler, or spend more on a GFX card :)

4.2ghz here with a 2500k and stock cooler :)

Main benefit of i7 is multiple threads per core but they don't really come into play with games (yet)

i am currently running 4.3ghz stock cooler and have read people getting 4.6ghz on a Coolmaster 212+ heatsink and fan combo

i can get 8.9sec in super pi 1.6 and just idling i get about 40deg and about 70 on 100% load

would be interested to see your superPI score so clean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...