Jump to content
SAU Community

Yellow Fever (restoring R33 And R34 Model Headlights)


Chang

Recommended Posts

  • 4 months later...
  • 4 weeks later...

Just tried this today on my very very very bad headlights. i had glue, acetone and yellow build up on my headlights and nothing would clear them up. did this today and i'm sooooooooooooooooo happy with the results. i cant believe how much better it looks. i can get pictures uploaded if you guys would like to see. have: left hand side 'before' picture and right hand side 'after' picture. thanks Chang :P :P :(:D

Edited by Darkness_Ryda1
Link to comment
Share on other sites

Just tried this today on my very very very bad headlights. i had glue, acetone and yellow build up on my headlights and nothing would clear them up. did this today and i'm sooooooooooooooooo happy with the results. i cant believe how much better it looks. i can get pictures uploaded if you guys would like to see. have: left hand side 'before' picture and right hand side 'after' picture. thanks Chang :huh::D:blink::blink:

Post up the pics lol...interested to see your results :D

Link to comment
Share on other sites

  • 4 months later...

call me rough but I used Autosol (metal polish cream) on my frosty (not cracked) R33 lights

only one go each, 5min tops and they look heaps better, not perfect, but respectable

.. not perfect but Cheap and quick

P.S. I always polish lights and glass when I do paint, helps with those UV thingyz + rain on the windscreen

Link to comment
Share on other sites

Hey guys just thought i would share i actually tried using a clay bar on mine the other week and then waxed them believe it or not they look shitloads better now. So if u have a claybar laying around give it a try

Link to comment
Share on other sites

GUMPTION cream cleaner available from coles or woolworths or hardware store it is like a serious Jif cleaner just rub on with minimal buffing and rub/buff off with clean cloth after a few minutes top job on mine and minimal work just did it whilst chamoising car after cleaning it.

Does a good job on tiles and grout too LOL keep the GF happy

Link to comment
Share on other sites

Just used the Glassylite cleaner kit on my headlights...fantastic stuff. They are so damn clear now. Wish I'd taken photos of the difference but it's hard to capture in photos (particularly phone cameras).

Highly recommend it.

Link to comment
Share on other sites

  • 2 weeks later...

That group buy is now closed.

Unfortunently I must fit into that Rare 1% of people with issues inside!. i have been using polish only to clean them up for some time, but there is alot on the inside that requires cleaning.

I attempted to open them up last weekend, to no available. It appears with age they do become brital. and this makes it very hard to open them up without breaking anything. fortunently I did stop before I wrecked them.

Without the Group buy, Where else can one get this sorted?

Or if anyone has any suggestions on opening them up.. Im all ears.

Cheers, d

Link to comment
Share on other sites

i've heard u need to heat them up to make the plastic soft, either low temp in the oven or with a hair dryer but be careful not to melt them or reshape them otherwise it wont go back together.. its a good idea but will take patience and a bit of effort

Its not the plastic thats the issue, its the Black glue which is not easy to get by.

Link to comment
Share on other sites

  • 5 months later...

So its not possible to get different lights for an R33? Mine aren't heaps bad but bad enough. I have been told you can't buy different lights for An R33, only genuine ones threw nissan that will end up going yellow after a few years anyway. I have a 4 door sedan.

Link to comment
Share on other sites

  • 2 weeks later...
just for a bit of info, autobarn now sell a kit for restoring them that contain, polish, cloth, fine sandpaper and most important that im going to have to wait for a year or so to see if it works, uv protective coating for the headlights so they dont go yellow again

It works quite well apparently. Yet to try it on my R33 though, next on the list.. My lights aint heaps bad though just a about half the RHS light.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Really comes down to user requirements, I have found my 324mm 350Z Brembo front set up more than sufficient for track use, especially for Wakefield Park with good brake pads. At Sydney Motorsport Park the GP Circuit can be a bit taxing on the braking system, I find by the 3rd hot lap there's rapid degradation in braking performance but at that point non semi slick tyres are about to give up anyway. And yes, the brakes are effective, slowing me down from 230km/h+ each time going into turn 1. Street use, it's more than enough for street activities. Most of the time people complain their brakes aren't sufficient, it's due to incorrect bleeding, poor choice of friction material, or faulty master cylinders.
    • I'm about to sell my Attakd kit actually, so if you want a budget 2nd hand kit they definitely do work, though make sure you update your BMC when/if you do. Just keep in mind that buying pads (for any aftermarket kit) can be a bit more complicated when you have an aftermarket caliper. Not all brands make pads in the shapes and sizes you may want, no matter what you end up with.
    • Hey guys, I had an R32 M/T RB20DET in my S13 quite a while ago, however I have replaced the chassis harness on the S13 and picked up a new motor (A31 A/T RB20DET according to the ECU) and I am having a hell of a time trying to figure out the dash wiring (specifically the black/pink wire for the fuel pump).  It seems this A31 loom is quite different at the dash connector and there is not even a black/pink wire anywhere on the engine loom (on one of the 5 dash plugs that are there), or on the ECU for that matter.  Every pinout I have seen is totally different from the actual wires on my ECU and i'm at a loss on how to wire this thing into my S13....     Any ideas?   In summary : A31 A/T engine loom/ecu pinouts are different than any pinouts i have seen online (specifically around pin 18 Fuel Pump Relay) 
    • What are you doing with the car? Drags, sprints, racing? A decent upgrade of dba 4000 rotors, good quality pads (endless, project mu, intima are all I have used), quality fluid and braided lines. All have held up to multiple big track days and street duties. No need for big fancy kits as some also require significant energy to come upto operating temp. Look at 350z caliper and rotor upgrade too.  @Dose Pipe Sutututu comment on them and did a good write up.
    • I've driven that one and it's a great deal and drives nice. The owner definitely treats it right on track. You would have gotten it for what you paid for this one too.   Keen to see what you do to this one. 
×
×
  • Create New...