Jump to content
SAU Community

What not to say when the cops pull you over


Recommended Posts

You must stop your vehicle if requested to do so by a police member, and you must obey any lawful direction given to you by a police member.

You must state your name and address when requested by a police member.

You must produce your driver's licence on request (if you do not have it on you, you have seven days to produce your full drivers licence to a police station)

The vast majority of traffic offences apply specifically to driving on a "highway".

You must be licensed to drive a motor vehicle on a highway. Penalty: a possible prison sentence for driving while unlicensed, suspended or disqualified.

In Victoria, if the police have reason to suspect you are carrying a radar detector, they may inspect your vehicle to look for and confiscate it. (Penalty for carrying one is $2000 maximum.)

The police do not have a power to search you or your vehicle merely to see if you are carrying anything irregular.

Whenever you are spoken to by the police you have a right to remain silent save for situations where parliament has passed laws that oblige you to give information.

A driver of a motor vehicle on a highway is required to state his name and address otherwise he may remain silent.

Answering police questions usually helps the police to prove an offence has been committed.

When the police ask you for your reason for committing an alleged offence it is in your interests and within your rights to remain silent or to deny committing any alleged offence rather than offer any explanation for your actions.

If you are asked for your reason for committing any offence, stating a reason can be interpreted as an implicit confession to having committed the offence, but is rarely accepted as exculpation for it: e.g. "Why were you travelling in excess of the speed limit?" If you say, "Because I was late picking the kids up from school" it can be taken as an admission to speeding but is not a reasonable excuse for it.

Usually the police won't exercise their discretion to "let you off with a warning" unless you have an extraordinarily meritorious and believable excuse, or your denial causes sufficient doubt to linger in the police member's mind.

Answering police questions is generally not in your interests and is often very damaging to your defence. It is easier to defend charges if a driver has told the police nothing more than his name and address. Every word a driver utters is usually 'another nail in his coffin'.

If you think there is something important the police should know, your lawyer should be able to communicate it to the police on your behalf.

If, despite the above, you decide it is best to answer police questions, you can insist upon the conversation being tape-recorded.

There are tape recording facilities at every police station and you have the right to insist that they be used before you answer any questions. (Make sure the tape is in and the record button is pushed before you start the interview).

A significant percentage of cases in the Magistrates Court involve people who believed they had 'nothing to hide' and who voluntarily attend police interviews only subsequently to regret having done so when they discover that the result of the interview is that the police nevertheless lay charges against them.

It gets even worse when the defendant's lawyer advises the defendant that had they chosen to remain silent and not to attend the police interview the police would have had insufficient evidence to prosecute the charge. This probably happens daily.

A registered owner of a motor vehicle must give information known to him that may identify the driver of the motor vehicle at any particular time (penalty, up to 2 years licence loss).

http://carpoint.ninemsn.com.au/news/blanks...ory.asp?ID=4989

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Wardest

I say we print the article from Carpoint and carry it with us.

Then if we get pulled over we can use it as a reference.

I was thinking exactly the same thing. Get it printed and put it in the glove box. If you ever got pulled over, pull it out and do the point reference. I like to see the coppa's face lol :D

Originally posted by Wardest

I say we print the article from Carpoint and carry it with us.

Then if we get pulled over we can use it as a reference.

i have just done that :D

And yes... from a motorist who had police 'fudge' details... i advise you to SAY NOTHING!

i feel a sticky

Originally posted by pushead

I was thinking exactly the same thing. Get it printed and put it in the glove box. If you ever got pulled over,  pull it out and do the point reference. I like to see the coppa's face lol :D

like cops know how to read :bahaha:

except for d-o-n-u-t and r-e-v-e-n-u-e

So let's say, if they pull you over and asked "How fast do you think you were doing?". Do I say, "I don't know, I was watching the road and not the speedo". Or give a rough speed limit e.g. say it's a 60 road, but you say "Oh probably about 55-61?"

This applies to getting pulled over without a radar gun. Or do you always insist to see the gun read out?

Originally posted by Ait

So let's say, if they pull you over and asked "How fast do you think you were doing?". Do I say, "I don't know, I was watching the road and not the speedo". Or give a rough speed limit e.g. say it's a 60 road, but you say "Oh probably about 55-61?"

This applies to getting pulled over without a radar gun. Or do you always insist to see the gun read out?

OMG... as the point said.

Originally posted by Leewah

Answering police questions is generally not in your interests and is often very damaging to your defence. It is easier to defend charges if a driver has told the police nothing more than his name and address. Every word a driver utters is usually 'another nail in his coffin'.

just cause they ask... dont mean you have to answer :D

just remember...

"Note: CarPoint makes every effort to ensure the information above is correct at the time of publish. However, given the incredibly fluid nature of Australian road rules in the current climate, we cannot 100 percent guarantee their veracity. Use at your own risk."

Originally posted by Leewah

The police do not have a power to search you or your vehicle merely to see if you are carrying anything irregular.

[/url]

If this is correct, wouldn't that mean they can't look under the bonnet on suspicion you might have a bov or pod filter?

Originally posted by Leewah

A significant percentage of cases in the Magistrates Court involve people who believed they had 'nothing to hide' and who voluntarily attend police interviews only subsequently to regret having done so when they discover that the result of the interview is that the police nevertheless lay charges against them.

It gets even worse when the defendant's lawyer advises the defendant that had they chosen to remain silent and not to attend the police interview the police would have had insufficient evidence to prosecute the charge. This probably happens daily.

Remember people, this can be applied to ANY law, not just road laws. This has happened to people I know for far more serious offences than speeding.

When the coppers cant get the real criminal, its very easy for them to pin it to someone else even if they dont directly admit knowledge of the offence.

Definitely best to keep mouth closed :uh-huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...