Jump to content
SAU Community

Recommended Posts

Fuel cooler is mounted at front of car . In front of radiator, behind grill. A/c condenser has been removed oil cooler is also mounted in its location. I didnt like the oil cooler mounting in front of front wheel..I'll try track down some pics

Fuel cooler is mounted at front of car . In front of radiator, behind grill. A/c condenser has been removed oil cooler is also mounted in its location. I didnt like the oil cooler mounting in front of front wheel..I'll try track down some pics

Yea I've got my oil cooler in front of my front wheel, I don't think it's very effiencent there

My 83/75 results is a page or 2 back

The fmw has a different wheel design yea

My 32 gtr was rebuilt with the following parts and was run in and tuned by Sean at EFI Performance

Engine:

Rb26 (2.6l)

Cosworth forged pistons (87mm)

Manley conrods

R34 gtr crankshaft ( new from Nissan)

Acl race bearings

Arp rod, head, main bolts

Reimax billet oil pump gear

Tomei 1.5 mm head gasket

Kelford 282 cams

Manley valve springs with ti retainers

Sump baffles

Oil cooler

Balanced and blueprinted

Os giken twin plate button clutch rebuilt by NPC

Machine work done by chilton engineering

Engine assembled by Dan at ERD

Greddy plennum

Greddy 100mm pipe kit

100mm intercooler

Turbonetics billet gtk 1050 turbo with .86 twin scroll rear housing

Turbosmart 60mm wastegate

2.5 inch screamer pipe

6 boost exh manifold hpc coated with egt ports

4 inch dumpipe

3 inch decat pipe

3 inch TItanium cat back exhaust

Magnafuel 750 pro tuner fuel pump ( 2000hp)

Bosch 044 (lift pump)

7 litre surge tank

Fuel cooler

Aeromotive fpr

Bosch 2200 cc injectors

All braided hoses

Splitfire coil packs

Power fc dejetro

Car made 650hp at 26 psi (485kw)

I will post a pic of Dyno chart soon.

The ignition system is at limit at 26 psi

I have just finished installing ls2 truck coils and an ati balancer. Next tune the boost is being increased and rev limit is being increased.

Aiming for 700hp + on 30 psi.

Will post results when it is sorted.

Thanks, no port work on head just reconditioned with valve springs, retainers, shims etc.

Running on Caltex eflex atm. This setup needs to be run on drum E85 to get more out of it. The motor/turbo can quite easily handle 40psi. Not too confident on the consistency of pump ethanol. However, this is still a street car and 650hp should be enough for the std gearbox atm...lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...