Jump to content
SAU Community

Recommended Posts

Haha firehose type 2000s.

I dont know why people bother with 1000's. Fark all difference in $$$'s and soooo much more room for moar powa with the 2000cc's. :P

Edited by Joshbigt62r

SS-4 Alpha ptotoype 1, Working with a 2.5L Rb25det and Tomei 264 / 8.9mm cams.

E85 fuel, externally gated.

This turbocharger made 465rwkws on 24psi maxing out 850cc injectors,

Thick yellow is from today, the rest is the controlled run. Ordered a set of 1200CCs, looking to crack 500rwkws.

It's now on 490rwkws. Same setup as above with 1200cc injectors. Vct is gone.

power.jpg

[][]

  • Like 1

On a hub dyno IIRC.

There isn't going to be 120kw difference between hub and wheels especially with the updated correction.

Sounds like they are not 1200s... what brand are they? Never heard of the flow being engraved into side before?

Haha firehose type 2000s.

I dont know why people bother with 1000's. Fark all difference in $$$'s and soooo much more room for moar powa with the 2000cc's. :P

I initially went 1000s because years ago when I got them, I wanted pkug n pkay, and they were much cheaper then 2000s.

also, e85 was no where near readily available.

will be getting some next stage though.

Hey guys,

dropped my GTR in today to get the e85 tune.

Talked to the tuner and he said once you get up to 390kws + you have to replace all your fuel lines to much bigger lines?

Has anyone done this? what have you used and what is the cost involved?

Hey guys,

dropped my GTR in today to get the e85 tune.

Talked to the tuner and he said once you get up to 390kws + you have to replace all your fuel lines to much bigger lines?

Has anyone done this? what have you used and what is the cost involved?

Man I have 1 044 in tank wallbro 600hp pump as a lift 2l surge tank with 2000id's I'm sitting just under 400kw.. Lines still standard to the filter.

Same, I made over 400awkw with standard lines as well...me when ppl give the wrong advice I understand that as we are not all experts, however, a mechanic / tuner 'should' know better

Cheers guys. As you said i only go by what so called experts tell me as im pretty much clueless myself.

But i do know my tuner is ULTRA conservative!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...