Jump to content
SAU Community

Recommended Posts



480kw on vp 109 and dash 5s @ 23psi, BACKED UP with repeated 140+mph runs. It can be done, just not by many :D

Mark32 being on powerplus rated at 108 would be pretty damn close to vp race fuel, i dont see why every one is getting their panties in a knot. Edited by linkems

I don't understand what the issue is. e85, increasing boost later in the rpm range, and 'at the limit' tuning probably explain the nice graph

20psi @ 4700rpm sounds very good, but reasonable

700Nm @ 5000 rpm sounds very good, but reasonable

nobody else even talks about, let alone posts graphs, about increasing boost with rpm. that's probably the main reason for the high peak power.

480kw on vp 109 and dash 5s @ 23psi, BACKED UP with repeated 140+mph runs. It can be done, just not by many :D

Mark32 being on powerplus rated at 108 would be pretty damn close to vp race fuel, i dont see why every one is getting their panties in a knot.

Finally someone with some backed up proof.

How much does your car weigh? I suspect you have more than 480kw

the specs from that video:

HKS 2,8l stroker kit + twin GT2860-5 + nismo intake plenum + greddy 264 cams + 1000cc RC injectors + Apexi D-Jetro + Almasi tuning

the scale on the torque curve looks wrong, but the power curve looks accurate

http://www.gtrpwr.co...thread.php?t=62

Skylinebestdynoresult.jpg

Edited by black bnr32

Yeah most people don't, but sometimes it's gotta be done because everyone else around then expects it to be "the norm"... And then we end up with more and more threads like "why am i down on power", when in actual fact they are perfectly fine... They are just expecting something that's not reasonable and trying to explain this to such users can be about as productive as belting ones head against a wall (similar to telling the GTX/500rwkw person that it was not possible, but we were all haters :/)

And for the record, there are no mini-me's running around that i know of :ph34r:

If you think thats BS, i know one person who got "498rwkw" out of -5's on PUMP and when i asked him to back it up with MPH he said its an inaccurate way to calculate power! the fark lol.

There is a guy in NZ that claims mid 500kw on pump on GT2860Rs who is a fairly respected track racer etc, which sounds like crap - even on a high reading dyno. The trap speed argument has come up but he has no interest in drag racing, conveniently.

There is a guy in NZ that claims mid 500kw on pump on GT2860Rs who is a fairly respected track racer etc, which sounds like crap - even on a high reading dyno. The trap speed argument has come up but he has no interest in drag racing, conveniently.

We have no interest in believing him then

There is a guy in NZ that claims mid 500kw on pump on GT2860Rs who is a fairly respected track racer etc, which sounds like crap - even on a high reading dyno. The trap speed argument has come up but he has no interest in drag racing, conveniently.

Dumb comment old boy

Maybe this engine is just more efficient than all the others using the same turbos hence the higher power....

And saying that the 1/4 is the real dyno works to a degree if you have traction. But what if your running street tyres and no traction at all like Marks 32 could be wheel spinning across the line in 5th gear and still run under 120mph....

But we also have nice clean air down here in Tassie....

Edited by WHITER33GTS-T

He also has a 2.8 maybe even a 3.0 bottom end.

Different ball game to the normal 2.6

Yet another keyboard god that knows everything from behind the computer screen just ask him....

Try geting some real world experience old boy instead of just reading the interwebs then thinking your an expert on everything

Maybe this engine is just more efficient than all the others using the same turbos hence the higher power....

And saying that the 1/4 is the real dyno works to a degree if you have traction. But what if your running street tyres and no traction at all like Marks 32 could be wheel spinning across the line in 5th gear and still run under 120mph....

But we also have nice clean air down here in Tassie....

The clean air must help a shit-load Rob, and you know better that anyone a lot of cars have been on that dyno and he's not the sort of bloke to produce stupid unrealistic dyno results.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...